Children are irrepressible dreamers, and their activities can endlessly touch and delight adults. When the results of creativity are in a clearly visible, specially designated place, young fidgets are delighted.
Equipment for an exhibition board does not always involve large financial expenditures. Any interested parent can make children's stands with their own hands.
How to choose the right material
Among the large assortment of modern stands, more and more consumers are choosing cork boards. They are easy to use, reliable, durable, and affordable.
Natural material – cork oak bark – satisfies general requirements safety for children's products and has a number of positive qualities:
- ecologically pure;
- easy to clean, does not attract dust;
- moisture resistant;
- refractory;
- chemical resistant;
- not damaged by fungus or insects;
- not electrified;
- shockproof;
- wear-resistant.
Cork stands will be a win-win option for both home and kindergarten.
How to make a stand
You don’t need to have any special craft skills or knowledge to please yourself and your children with a functional new item in your home.
Think in advance about how to harmoniously fit your new stand into the interior.
You can experiment both with the color of the board itself - paint it or upholster it with fabric of the desired color, and with the frame, choosing the best combination.
The frame is usually made of wood, plastic, or metal profile. It is also recommended to use cable channels, the width of which is slightly greater than the thickness of the board.
Select the type of wall mount for the stand: permanently glued or free-hanging on hinges.
A minimum set of preparations and tools used, 30 minutes of work - and the result will be on the wall.
Determine the desired dimensions of the stand, prepare a cork sheet to suit the size.
Select the material for the back wall - plywood, fiberboard.
Glue both sheets together. Glue - liquid nails, you can use another one. First degrease the surface, and after applying the glue, press the parts tightly together. If desired, cover the working surface of the stand with fabric.
Attach the previously prepared frame to the base. If desired, attach loops for fastening on the reverse side.
Attach the stand to the wall using glue or double-sided tape for a permanent option. For alternative way- hang on loops.
How to use the stand rationally
After you have made the stand with your own hands, you can begin to actively use it.
Note!
There are two main design methods. You can attach pockets to the surface of the board. These can be paper files, or transparent pieces of thin plexiglass, secured with double-sided tape.
This type of design is used for information stands.
The pockets hold sheets of paper with important information, which parents should know about the work schedule, routine, and rules of behavior for children in kindergarten.
Information can be updated daily (food menu) or as needed.
People actively use stands of different ages both at work and at home. Reminders of important events, planning for the near future, pleasant memories captured in photographs, visualization of your desires, a convenient organizer - everyone will independently add the most relevant for themselves to the list of useful functions.
On display stands made of cork necessary items– photographs, pictures, paper notes, small souvenirs are attached using buttons, pins, tailor’s needles.
Note!
The surface of the board does not suffer from this; there are no visible holes left. When setting up a stand for children, you need to make sure that sharp objects cannot harm the kids.
The stand on which teachers display the results of children's work for the day is always popular with concerned parents. And the children are happy to present new crafts and arrange mini-exhibitions in the apartment.
Take a photo of the filled stand as a keepsake, and let it be constantly updated - the world of children's imagination is inexhaustible.
DIY stand photo
Note!
What are information stands made of? This question is asked by those who, for one reason or another, need to make information stand. In this article I will try to explain in detail what, and most importantly, how information stands are made.
So, let's begin. The main thing in an information stand is its basis. It determines how long the stand will last. The main material for the stand is PVC (sheet plastic). But not all plastics are the same! So, for example, plastics made in China have a more porous structure and, as a result, are more fragile than plastics (PVC) made in Germany, Hungary, and Israel. Recently, plastics (PVC) have become very popular. Russian manufacturers, the quality of which also leaves much to be desired. So what is the difference between “Chinese” plastics (PVC) and non-Chinese ones? Everything is very simple. The difference is in the quality of the plastic itself (PVC)! As is known all polymer-containing materials (materials made of plastic and plastics, including self-adhesive films) - cellular polycarbonate, PVC plastic, plexiglass, polystyrene can change their appearance under the influence of different temperatures. So, “Chinese” plastic (PVC) is the most susceptible to change. It is very brittle at low temperatures (from 0°C), and too soft at high temperatures (+25°C and above) and as a result of changes appearance very noticeable. If over time your stand has become “wavy” or a corner has broken off during installation, you should know that Chinese plastic was used in the production of your stand.
The second, no less important component of the information stand is the pockets (files) located on the base. The pockets are made of organic glass (PMMA), transparent polyethylene (PET) or transparent plastic (PVC), and are attached to the base with double-sided tape or special glue (depending on the purpose of the information stand). Today, the most popular material for making pockets (files) is transparent PVC with a thickness of 0.6 mm. This is a fairly durable material and at the same time is relatively inexpensive, for example, than a plexiglass pocket (PMMA). When designing an information stand, it is important to consider the size of the pocket, as it differs from the size of the sheet placed inside it! So, for example, a pocket for an A4 sheet (210x297) will have a size of (225x305) mm. Specialists of the Obavok company will be happy to help you in developing information stands to suit your needs!
The third component of the stand is its “header”, the name of the stand. The hat is made from PVC film of various colors using plotter cutting, or using the large format printing.
I would like to say that this is all, the stand is ready! But that's not true. The most important thing is ahead - making an information stand with your own hands!
First you need to make a sketch of the future stand, observing the dimensions and placement of pockets on the stand. It is important to consider the distance between the pockets and the distance from the edge of the base. It is recommended to make the distance between pockets 20 mm in horizontal and vertical rows. The distance from the edge of the base to the pocket is 30 mm. The stand header usually has a height of 100 mm.
Tools: metal square, stationery knife, felt squeegee (you can do without it), metal ruler.
Let's get started!
Using a square, we make markings on the sheet material, since it is important that the stand is “in the corner,” and we cut out the base using a utility knife and a metal ruler. To do this, apply a ruler to the marking and use a utility knife to make a cut. It is important not to try to cut the material the first time, otherwise you may ruin the base. Use smooth movements stationery knife along the ruler, each time increasing the pressure on the blade. Then the cut will be smooth and neat. Repeat on four sides.
Next we apply (roll) the cap. To do this, place the cap (sticker) at the top of the base and secure it with a small weight, such as a small weight. At the same time, turn the base itself with its upper part towards you, for convenience. Using your left hand to press the sticker onto the base, gently lift the right side of the sticker away from the base to a distance of approximately 10 centimeters. Separate the backing from the sticker by 5 centimeters and fold it inward. Using a felt squeegee, roll the separated part of the hat onto the base. Next, gradually removing the backing, apply the cap to the base.
There are pockets left. We take a ruler and mark the location of the pockets based on the stand. Next, we place the pockets on the base, according to the markings. Pressing the pocket tightly to the base with your left hand, with your right hand we lift the edge of the pocket and remove the protective tape from the tape, after which we fix the edge of the pocket on the base by pressing the edge of the pocket with our right hand. The pocket is fixed. We do the same with the two remaining sides of the pocket and the remaining pockets on the stand!
That's all! Your stand is ready! All that remains is to place it indoors.
PS. The Obavok company uses sheet plastic (PVC) to manufacture stands of only world brands High Quality! Also in our company you can buy sheet plastic for stands, pockets for stands and hats for them.
Now you understand what stands are made of for schools, information stands for hospitals, information stands for parents in kindergartens, information stands at enterprises, and stands for kindergartens.
If you want to order ready-made stands, please contact our company! We use only high-quality materials, and your stand can be made very quickly! In some cases, within a few hours!
I hope that this information was useful to you!
The main task of the information stand is to familiarize the general public with any information. At an enterprise this could be orders and instructions, at a store it could be information for customers, and at school it could be a schedule of subjects. Depending on how much information will be on the stand, its size is determined. In order for the stand to fit organically into your announcement corner, you need to choose the right stand on the website http://vs-smol.ru/stendy-tablichki.htm. If you have the opportunity and desire, you can make it yourself and our material will help you with this.
Necessary materials
Everything you need for manufacturing can be found in the office or at home after the next renovation:
- plywood;
- PVC sheet of the color you need;
- plexiglass or polyethylene film up to 1 mm thick;
- any glue suitable for PVC and plastic;
- metal ruler;
- a simple pencil;
- hacksaw for metal.
Base manufacturing process
First of all, you need to decide on the size of the stand to be made. To prevent it from being too small or too large, think about what information you want to place on it and how to optimally use this space. For a small company, a stand with 4 to 6 A4 size sheets arranged in two rows may be sufficient. Between the sheets, for a more aesthetic appearance and better perception of information, it is necessary to leave a gap of 20 - 30 mm. Don’t forget about the header of the information stand, which will “invite” people. For this, a space of approximately 100 mm wide must be left on top of the sheet.
When the dimensions are determined, you can begin marking using a metal ruler. We use a sheet of plywood or plastic as a base for the stand. When marking, do not forget about the corners. We control rectangularity using a square or measuring diagonals, the distance between which should be the same size. Having made sure that the markings are correct, we cut out the base along the intended contour.
The resulting workpiece must be given an aesthetic appearance. To do this, paint it in any suitable color. Using plastic in this regard is more profitable - it is already factory painted, and you can save time on this procedure.
Making pockets
The pocket is the main part of the stand, where the information itself will be located. There are several options for making stand pockets.
The most inexpensive and common is to use an ordinary office file for documents. Using glue or double-sided tape, it is glued to the base and the pocket for insertion is ready.
But if you want your information stand to have a more presentable appearance, then you need to put in a little effort. We will use transparent plexiglass as the material. We draw the outline of the pocket onto the sheet, which should be 10 - 15 mm larger than a standard A4 sheet and cut it out using a hacksaw. To make it easier to insert and remove paper, we cut off the corner of the pocket on one side.
From the same plastic we cut out strips of length equal to the size of the pocket and 5 mm wide. We glue them along the edges of the pocket, except for the top side, and then, in the designated places, to the stand. These strips will allow you to lift the plexiglass.
In the same way you can make pockets from polyethylene film 0.7-1 mm thick, only fastening to the stand will be done using double-sided tape.
The heading for the header of the information stand can be made using a stencil or letters cut out of colored plastic. You can also resort to large format printing services. Remember that the title is business card stand and the more imagination you show, the more attractive your stand will look.
That's all - the information stand is ready, all that remains is to find a suitable place for it.
Anna Svetlichnaya
Dear colleagues!
In connection with the implementation of the Federal State Educational Standard, the task teacher organize work with parents, one of the forms of which is information corners. I would like to present to your attention master class on making a stand"No one is forgotten, nothing is forgotten!"
First, we need to develop a layout. I did this in PowerPoint
For work we need...
The width of our stand 1 meter, i.e. 2 tiles.
Since the layout consists of 4 wavy stripes, 1 template will suit both the concave and convex parts, only upside down.
We attach the template to tiles, trace with a pencil.
Upper part cut the tiles
and apply it to the bottom of the part, combine it so that the cut matches, and when assembling it, stand I didn't have to adjust the parts.
We turn the part over, trace it and cut it out from another tiles, then the details will match.
It is better to number the details immediately reverse side. Thus, 4 strips are cut out, each of which consists of 2 parts.
To paint, mix the color with PVA glue to achieve the desired shade. We paint the parts according to the numbering, not forgetting to paint the edges.
Name stand we type on the computer, make templates, trace and cut out tiles.
We also need flowers. We make a template.
We will have flowers volumetric. To do this we will have to cut the template several times.
First, cut off the calyx from the flower. Circle on tiles received details.
Then cut the cup into 2 parts, outline the smaller one, and cut it out.
Cut off the upper part from the flower template, trace the resulting part onto tiles.
We cut off another part of the template and trace the very bottom of the flower on tiles.
It turns out volumetric flower.
Now let's color all the details in the right color. When the paint dries, glue it together with glue. "The Dragon". The flower parts are glued together on the reverse side using scraps tiles.
More to make stand we will need the Eternal Flame. In our case, a picture is cut out, glued with pencil glue and laminated with tape. We cut it out with a stationery knife, retreating a couple of mm from the edge of the picture.
Now we will deal with the pockets that are needed to place information. They can be made from: files, corners, folders, or you can buy ready-made ones. We will make pockets from folders. The folder needs to be cut.
Using self-adhesive paper, we make a frame. We put double-sided tape on the back side.
Now let's assemble our stand. The parts are fastened together on the reverse side with scraps tiles and glue"The Dragon".Then we place our details on it: pockets, flowers, letters and the Eternal Flame. Let's fill the pockets with information.
Instructions
It is most convenient to use information stands with a soft covering, to which sheets with advertisements are attached. Stands with A4 plastic pockets are becoming a thing of the past. Information that needs to be made public is not always placed on sheets standard size.
The stand must have a name. It is placed in the center, closer to the top edge. You can use the standard ones: “Company news”, “Today in the company”, “Information”. Or invent proper name, reflecting the scope of the organization’s activities.
Divide the stand into two halves. On the one hand there will be daily work matters. On the other hand, there are holidays, congratulations and other news not related to the main work.
Then informational headings are attached to the stand: “Congratulations”, “Vacations”, “Best Employees”, etc. All news that is updated daily should be displayed in these titles.
If you need to post something very important, attach the heading “Urgent”. It is highlighted in red font and large letters.
When setting up your stand, try to avoid bureaucratic expressions. Write texts in simple, accessible language. Make sure that all employees, from the cleaning lady to general director, the content was clear.
Draw up your holiday greetings with multi-colored pencils or beautiful postcards. Come up with wishes yourself, from the heart, without turning to the Internet for help. The creations that are posted on sites dedicated to congratulations often leave much to be desired.
