Dyeing fur at home
Many have probably already accumulated a couple of dozen things in the closet. And it seems a pity to throw out, and it is already impossible to wear. It is possible that you will show your talents and decide to create something completely new and unique from the old fur thing, but this will not make the fur the same color. You can, of course, turn to a specialist and he will return to his former beauty. This requires financial investment. But you can resort to another method and dye the fur at home.
Fur products always attract attention. Not surprising, because they look beautiful and rich. And in the cold season they also warm well, and there is no need to make a choice between beauty and heat. But, like any thing, over time they lose their properties. The product can be everything, also neat and look decent, but the color changes. And this pretty much spoils the original look.
How to determine the color of the fur?
First you need to determine what color you want. It is advised to paint fur products in colors that are a tone lower than the original. But you can also highlight. Especially if your product was white and yellowed over time. In this case, there are two ways: either make the fur dark, or try to return the color that was when you bought it.
Definition of fur colors We will consider the first option later. And in order to return the white color, you can purchase the paint, which is used for suede products. They are sold in spray cans. It is not necessary to paint over the entire length, only the tips can be processed. Spray the can at a distance of 60-70 cm. Try to apply it to all visible areas. To prevent fur from sticking, comb the product immediately after the procedure.
Recipes for the paint solution
Before dyeing the fur at home, it must first be prepared for this. Remember that paint is poorly applied to soiled or oily items. She just does not penetrate deep into. So first clean the thing from dirt and grease. In this case, two types of solution are used. First: 1 liter of water, ammonia 25%, about 6-7 grams, add 20 g of salt and 1-2 grams of baking soda here. It is advisable to add another 1 g of detergent. Then soak the product for an hour, sometimes stirring it, then wring it out and rinse thoroughly with water.
Basic recipes for painting The second option: in 10 liters of water is bred, a pound of slaked lime, about 150 grams of alum and another vitriol about 250 grams are added there. There are many more options, these are some of the most popular. You can just wash the item with laundry soap. Even shampoo for oily hair is suitable. Just do not rub hard so as not to harm the fur. Note that to dye the fur at home, you need to take care of the skin itself.
Solutions can deplete it. To prevent this situation, it is necessary to smear glycerin or a fat cream on the wrong side. After cleaning, the thing is fixed on a flat surface. The skin needs a little stretch. On the same surface, the fur should be completely dry.
The method of dyeing the fur yourself If you decide to change the color of the product globally, you should first bleach it. Think it's complicated? No, this is very similar to hair dyeing. The procedure is approximately the same. After, brighten the color after staining and bring it as close as possible to the color indicated on the package. You can, of course, use regular peroxide. Before you dye your fur at home, do a little experiment. On a small area that is not visible when worn, apply hair dye of the selected color.
Paint the house
So you can evaluate the appearance of the product after the procedure. Do not risk resorting immediately to changing the whole thing. All paint manufacturers write that the final result may vary. Especially if initially the fur is very dark. So, how to paint the fur at home? Protect your hands with gloves, apply quickly. See if all areas have been processed. To withstand the paint you need as much as indicated in the instructions. After the procedure, rinse the dyed fur with water.
Dyeing fur at home You can make a solution of water and vinegar. As after hair coloring, you need to apply a balm. This addition will add a beautiful shine and shine to the fur. And rinse with water again. Dry gently using a towel. You can make the color completely unique by resorting to the method that is used for highlighting. More precisely, paint only some areas and wrap them in foil. The result is specks of a different color against the background of the main one. Your clothes will be unusual, original and eye-catching.
After painting, the color will be irresistible The product processed in this way must be looked after as before. The effect after the procedure lasts about 8 months. Further color depends on the type of fur, and on the tool that was used. So the procedure will have to be repeated again. But with the experience gained it will be much easier. And you can easily choose the right color, work out and create something completely extraordinary.
Natural fur and its dyeing
Natural fur dyeing has its own characteristics. For example, a fox successfully holds color and lends itself perfectly to such experiments. And the mink is worse. The beaver reacts to lightening in yellow, and the muskrat will surprise with an unusual peach shade with a white bottom. Over time, the paint burns out and takes on a completely different look. A dark solution of potassium permanganate will help return the brown shade to the fox.
Suede paint should be used if and only if you do not want to paint the fur completely. It will help to give a new shade only at the ends of the fur and no more. So you learned the basic ways to restore the former beauty of things. Based on the experience of dyeing your own hair, if there was one, choose a paint. Too cheap, it can lose its appearance in a week, so you should not save in such a responsible matter. You can learn more about how fur is painted from the video.
Natural fur - conquer any There are many salons and dry cleaners where you can apply for a procedure for dyeing fur. There is already a professional will do your favorite thing. After everything is ready, carefully inspect the result so that it meets your wishes. Be careful and do not rush to run away home for joy, first evaluate the product.
Video
Alas, over time, the fur on our beloved fur coats loses its original appearance, changes in color and shape. But you do not have to run after a new product. The first reason is far from cheap, and the second - we will tell you how to dye the fur at home. Of course, it should be rightly noted that not everyone decides to paint at home. Most are simply afraid to spoil the fur and prefers to entrust the product to professionals. This, of course, has its own meaning. But with our recommendations, you will be able not only not to spoil the product, but also to breathe new life into it. The fur will regain its shape, the villi will become soft, and most importantly, the color of the product will again be like new. Before painting it is necessary to clean it. Without this procedure, painting can happen with unpainted places, which will only further exacerbate the situation.
We clean the fur
For cleaning we need:
- water - 1 l;
- salt - 20 g;
- ammonia - (25%) - 3 g;
- detergent - 1 g;
- soda - 2 g.
Mix and soak the product in the resulting solution for at least an hour. Then squeeze and rinse well under running water. Before painting, it is necessary to completely dry it.
How to dye natural fur at home
For painting we need:
- paint for fur: in relation to the original color, you must choose a darker shade;
- fat cream (glycerin is also suitable);
- vinegar.
Dyeing fur at home
- After we cleaned the pile with the solution, it is necessary to stretch it on the board and fix it. This will not let the fur sit.
- In order to avoid drying out of the product, its reverse side must be greased with a greasy cream or glycerin.
- Wet the pile a little and paint it.
- Mix warm water and vinegar.
- We place a fur coat after painting.
- The product should be dried without using a hair dryer.
As we can see, dyeing the fur at home is not very difficult. It is only necessary to adhere to the rules: before painting, it is necessary to clean the product with a solution, in a small area, check how the pile reacts to the paint and smearing the mezra with glycerin.
How to dye fox fur at home
The fox is painted according to the same principles. It is necessary to clean it with a solution. If there are spots on the product, they can be removed with a solution from one teaspoon of ammonia and three tablespoons of salt dissolved in one liter of water.
It is necessary to paint on wet pile. After the paint has been infused, wash it off under the shower. This kind of fur can be dried with a hairdryer.
How to dye fur at home with hair dye
It would seem that you can still dye the fur at home. It turns out that ordinary hair dye is great for this. The advantages of this method - it turns out a rich color and ease of painting. Minus - such a saturated color lasts not so long, about six months.
- In order to radically change the color, the coat should be lightened using an oxidizing agent.
- Paint evenly with a special brush.
If you like experimenting, try painting the fur coat in tonic. It will give a temporary shade, and you will definitely understand your preferences.
We figured out how and how to dye the fur at home. After painting, special care is required. You can apply hair balm dissolved in water and rinse it off the product. The fur will receive a special color, and the product will last much longer. Good luck!
Over time, the fur wears out, can fade in places, lose color saturation. But this is not a reason to send things to the trash. After painting, they have a good chance of starting a new life. Ateliers and dry cleaners can convince that old products will not withstand such an impact, or require a considerable amount for the procedure. We will tell you how easy and inexpensive it is to dye the fur at home.
Where to paint a fur product?
There are several options for resolving the issue of where to give the fur for painting. They differ in price and range of services offered. Before making a decision, check which of them are in your city.
- For problems with clothing, it is customary to contact the atelier. Things from fur are no exception: there are special fur ateliers that can be contacted with questions of repair and dyeing.
- Some dry cleaners not only wash clothes, but also dye fabrics and fur.
- In factories, fur is dyed without fail, but on an industrial scale. Not all factories can address the issue of painting a single product.
- It is completely uncomplicated to dye the fur yourself at home.
How can you color the fur?
Manufacturers claim that staining is carried out according to a complex technology with the use of dyes and oxidizing agents. In fact, this technique is almost no different from painting in a hairdresser. It turns out that fur can be successfully updated with regular hair dye. Indeed, in its structure, the hair of an animal is very similar to human. The described method is safe for strong mezra (leather from the inside of the pile), reliable and easy to execute. It is suitable for any kind of natural pile.
It is important to know that it is impossible to work with finished products (hats, fur coats, collars), before they are not discontinued. This is necessary in order to have access to the Mezra.
Before proceeding, you need to check the state of the mezra. It should be moistened with water and try to stretch. If it does not stretch and does not tear, you can use paint. Otherwise, it’s not worth the risk. You can tint the color with a tint hair balm, following the instructions. A bright and fresh shade lasts as long and durable as the paint. In this way, you can dye an artificial pile, since it is not as resistant as the real one, as well as silver fox, Arctic fox, rabbit, and mink.
Instructions for dyeing fur at home
Since the fur is thick and long, you may need 2 packs of paint. This is especially true for Arctic fox and mink. It’s better not to buy the first stain available, but rather to use proven brands. Having prepared the workplace, you can start painting according to the method consisting of two stages.
Stage 1 - Preparation
It is necessary for cleaning from grease and dust for high-quality and uniform coloring.
- Prepare a cleaning solution: soda, salt, washing powder per teaspoon per liter of water.
- Brush the pile.
- Rinse under warm running water.
- Leave to dry.
Stage 2 - painting
- Wear protective plastic or rubber gloves.
- Prepare the coloring mixture according to the instructions.
- Before staining, it is necessary to treat the mezdra with glycerin (you can replace it with any fat cream). This will prevent the skin from drying out.
- Apply the mixture as quickly as possible, combing the pile in the direction of natural growth.
- Roll up and put in a plastic bag.
- In time, the paint must be kept for as long as indicated in the instructions. Compliance with the recommendations is mandatory, otherwise you risk spoiling the material.
- Rinse in warm water with any shampoo.
- Treat with any hair balm for shine and silkiness.
- Wash off all products with warm running water.
- Rinse in warm water with vinegar: 1 tablespoon per liter of water. You can use any table vinegar.
- Gently pat dry with a towel.
- Grease the mezdra again with a thin layer of glycerin. Gently knead it.
The drying process should take place in natural conditions - at room temperature, without the use of heaters, hair dryers and air conditioners. Drying time can be up to 3 days, depending on the length and density of the fur. Speeding up the process can lead to damage to the fibers.
After drying, the product may sit down. To avoid this, pin it to any hard surface with the face down. For example, push pins or sewing pins to a wooden board.
It is difficult to paint light and red shades with any hair dye, no matter how much it costs. Therefore, you can repeat the procedure 2-3 times, especially if you want to get a saturated black color.
The easiest way is when you just need to strengthen the tone or make it darker. In order to properly dye the fox fur, which has a white or other light color, at home, it is necessary to very carefully paint the pile to the very roots and the mezdra itself. You can do this with a regular toothbrush, and then comb through the comb in different directions. It should be borne in mind that the chemical effect on the skin does not pass without a trace. To change its color with minimal risk, use a regular marker.
When coloring dark things in lighter tones, you need to be prepared for an unexpected result. Of course, like hair, fur with dark pigment must first be discolored. To avoid surprises, cut a small piece of material and work on it. You can experiment by mixing colors in different proportions to achieve the desired result.
Do not try to independently change the color of a whole coat or other large products. Such a surface cannot be painted manually evenly and quickly. The described methods are suitable for relatively small things, for example, for a fur collar on a sheepskin coat or jacket.
The fact that the color disappears, you can not worry. Colored hair retains its shade even with regular contact with water and detergents for many weeks in a row, and clothes get wet much less often. The result is guaranteed for 7-8 months. After this, the staining procedure can be repeated. The most persistent color is red.
What to do if you can’t use paint?
The described technique is not suitable for artificial fur, since its structure is not as strong as that of natural fur. Also, if you are scared to damage or stain the product, your skin is weak, unreliable, or there are any other reasons to avoid chemicals for hair, you can do with shoe paint for suede, velor and nubuck in cans. This method will completely cope with the masking of burnt areas. According to the instructions, the balloon must be shaken and the substance applied from a distance of 20 cm. In order for the color to spread evenly over the entire surface, after applying the paint, you can “smear” it with a napkin.
If you are no longer going to wear clothes with fur and don’t know what to do with it, think about whether to decorate your handbag, headphones and other accessories with stylish, bright and multi-colored fur inserts.
If you are still not sure whether it is worth painting your product and how to do it exactly, contact the workshop and consult with specialists.
After proper painting, following all the rules and instructions, the fur will become as soft and thick as before, and will look completely new!
Instruction manual
If the fur is very heavily soiled, it should be cleaned with an alkaline solution. Dyes penetrate poorly into the structure of dirty or oily hair. The cleaning solution is prepared from salt - 2-3 teaspoons, ammonia - 1 teaspoon, detergent -1 teaspoon, baking soda - 2 teaspoons, per liter of water. Apply to the fur with a brush. Washed and dried naturally.
The skin from the inside of the fur - mezdra - must first be treated with a greasy cream or glycerin to prevent it from drying out.
We paint the usual fur for. We apply paint. Previously, the fur can be moistened with water so that the paint is distributed evenly. You need to work so that you can rub the paint with your hand and avoid unpainted places. In time we hold, as indicated on the box, depending on the color.
After the rinse the fur in warm water, with the addition of vinegar. Gently get wet with a towel.
Related videos
Natural fur always relevant. In such a fur coat it is easiest to survive the harsh Russian winter. The most stylish, elegant, chic are considered mink products. Sometimes it becomes necessary to paint a mink coat.
Instruction manual
The fur is good in that in its structure and appearance it is very close to human hair. Therefore, many color it with hair dyes. Get a paint that you already checked once on your own. If you liked it in its qualities and durability, then it can be used for dyeing natural fur.
Paint a coat with an aerosol or spray gun. Perform the procedure at a distance of about 50-70 cm from the fur. And without fail, rub the product with a comb or. Thanks to this, you will not only remove excess paint, but also distribute it more evenly.
Now dry the fur. Do this very carefully and slowly. For these purposes, you can use a hairdryer. The fur itself is constantly combed. This is necessary so that in the future he does not get confused and does not fall down.
Some women, to give the fur a shine and soften it, after such a procedure, it is recommended to use a good hair balm.
Related videos
note
An alternative to self-dyeing of natural fur is to contact a dry cleaning specialist. But all such institutions will take up this work.
Useful advice
Experts recommend using Fara or Prestige paints to paint mink fur. They are most suitable for these purposes. The color can last up to eight months, and after that it only fades slightly. True, for mink, the choice of shades is very limited: red, chestnut or black. It is worth noting that the most resistant color is red paint. And everyone's favorite black eventually turns into brown.
Screen staining can be done. Thanks to this, the mink can acquire the color of a leopard.
Sometimes it happens that a fur product can last for many years, retaining warmth and beauty, but its color has become such that you can no longer afford to wear a fur coat or hat. Sometimes the fur fades, spots, sheds, and sometimes its color simply bothers the owner. If the color of a fur coat does not satisfy you, this is not a reason to dispose of things. You can try to change the color of the fur yourself, dyeing it at home in the desired color.
Instruction manual
When choosing a dye for fur, buy only the shade that is darker than the one in which the fur of your item is already dyed.
The product can be painted only in stainless barrels or in special plastic tanks using tinting agents or oxidative dyes. The easiest way to color the coat is oxidative, as they are inexpensive and allow you to color the fur at lower temperatures, resulting in a beautiful shine.
If the fur is old, it may not withstand the operation. Dirty and stained fur products are also poorly painted - thoroughly clean the fur before painting. Prepare a solution from a liter of hot (35-38 degrees) water, dilute 20 g of salt, 2-3 g of ammonia 25% in it, and add a gram of detergent or shampoo and a gram of baking soda. If more solution is required, increase the amount of the ingredients in proportion to the increase in the amount of water. Two liters, take twice as many ingredients, three liters - three times more. Stain the skin with the resulting solution until it is ready for painting.
Related videos
You can change the skin color of a particular product in home conditions. However, it must be borne in mind that the effect will not be the same as with industrial painting. Staining is deep and superficial. Deep staining involves immersing the skin in a dye solution. For surface staining, use a brush or spray.
You will need
- Dye powder, water, basin, vinegar, salt
Instruction manual
Eliminate skin contamination. Decide on the method of coloring the skin.
Dye the dye powder with warm water and mix thoroughly. Next, strain the mixture. This is necessary in order to prevent the appearance of lumps that form spots on the area to be painted.
Pour the dye into the pan, fill with two liters of water and boil. Then remove the dye solution from the heat and cool to 45 degrees. If the solution will have a higher temperature, the skin will shrink when interacting with it, lose its strength and elasticity.
Soak the skin in warm water for a few. The skin should get wet well, otherwise wet areas will remain not stained. It is possible to determine whether the wet is good enough by a string of bubbles that, when insufficiently moistened, stand out from the pores.
Pour the dye into the dishes, which will easily accommodate. Remove the skin from the water, wring it out and place in a dish with a solution. The surface should be completely covered with dye. In addition, the product must be turned over from time to time. This will allow the paint to lie evenly.
Fasten the paint. To do this, prepare a solution. Take one liter of water, a glass of vinegar and one tablespoon of salt. Mix the ingredients. Put the skin into this solution.
Squeeze and place the product on a wooden board face up. Soon the product will dry out and delight you with an updated look.
Fur products made of Arctic fox not only look great, but also fulfill their main function - heat preservation. The fox fur pile has a large length, therefore, dust particles and substances from the environment that give yellow are accumulated in it. Not so strong pollution can be cleaned, but with persistent it is necessary to visit a dry-cleaner, after all it is impossible to use aggressive means on gentle fur.
Instruction manual
Take bran or flour and slightly heat in a pan. Quickly sprinkle the hot mixture on the fur and brush it with a soft brush. A fur brush can be purchased at a supermarket of household goods or even at a regular pet store. After you remove the flour from the product, shake it. It is better to do this procedure on the balcony or on the street, if you live in a private house.
Dilute vinegar in water 1 tbsp. spoon per 200 ml of liquid. Dampen a soft cloth and rub the fur over it. Then use clean water, but do not wet the product too much. If you were cleaning, put it on a three-liter jar to dry, and hang the coat on the coat hanger until it dries completely. Do not forget to periodically shake the fur, otherwise it will dry out and become not fluffy.
You can clean the fox with aviation gasoline. To do this, moisten the sponge in a liquid and gently wipe the fur. Wait for the gas to evaporate completely. Then rub regular potato starch and after 10-15 minutes thoroughly shake the fur in the fresh air or vacuum it in the weakest mode (preferably with a machine vacuum cleaner).
If the product is no longer there and the question “throw out or clean” is acute, then there is nothing to lose and you can try washing the product. Pour warm water into the basin, add liquid powder and soak the fur in the resulting solution. The stronger the pollution, the higher the concentration of the powder should be. Then thoroughly rinse and dry the product. Usually, after this procedure, the appearance improves, and the pollution disappears. If the skin becomes stiff, just rub a small amount of aviation gasoline into it.
Related videos
Useful advice
If you are afraid to spoil the fur, consult a professional. In the dry cleaning, you will clean the contaminated fur using gentle means and modern technology.
Fur mink in the modern world is becoming increasingly popular, despite its high price. Some countries have specialized mink farms. Fashionistas and adherents of natural furs explain that it is in a natural fur coat that it is easier to survive winter and cold weather. Mink coats are popular in that they are the most durable in their use. Sometimes there are cases when it is necessary to paint or repaint this item of your wardrobe in a different color in order to refresh. Of course, to dye the fur mink yourself without certain skills, you must be extremely careful so as not to spoil the thing.
You will need
- - mink fur,
- - paint
- - spray can.
Instruction manual
It is recommended to paint using a spray gun or aerosol at a distance of about 50-70 cm from the fur mink and necessarily rubbing or comb, because so the paint is distributed evenly more and removed excess.
The stereotype that fur products should be exclusively natural colors has long been destroyed. More and more fur windows are full of models painted in the trendiest, most daring colors. Particularly relevant are products that combine genuine leather and fur.
For example, leather jackets and jackets with bright fur inserts on collars and pockets are now a popular trend. Colored fur is used to trim such clothes as women's dresses, sweaters, and vests. Bright fur hats also won the love of youth.
Unfortunately, dyed fur has one drawback - over time, namely, after 4-5 seasons, it begins to fade and fade. If the product is beloved, and you do not want to part with it, then the question comes to mind - is it possible to dye natural fur yourself?
It turns out that it is possible, and even without risk, to damage an expensive product. Safely refreshing the color of the fur is best done with special salamander spray colors. Spray cans are called Fur-Fresh, and have an assortment of different shades. In addition to the main purpose, this paint has a number of additional advantages - it returns the fur softness, silkiness and luster.
It is worth noting that it will not be possible to radically change the color of the fur with this paint, it can only be enhanced by the existing shade or given to it a little more depth and saturation. It is better to paint with a spray only collars, hats, and other details that will not come into contact with the bag, because the paint can leave marks on it with constant contact. To paint the product with this paint you need to apply it on clean fur, massage gently and then dry.
There is another way to dye natural fur at home. For this, ordinary hair dye is used. After all, fur is similar in structure to human hair, and therefore such a dye is suitable and safe. To color her thing, you need to remove the entire lining, then lightly treat the skins with glycerin, this will prevent them from drying out, and only then proceed with painting. The fur is dyed according to the same principle as the hair with a brush. Keep the paint as indicated in the instructions. Then the fur is washed and dried.
Only three rules must be taken into account:
1. You can only paint fur with hair dye in darker shades, but not in any way lighter than the original tone.
2. When washing off the paint, never wet the skin of the product!
3. You should not try to repaint a new product just because you did not like the color. The described technologies can be applied only to small damaged areas of fur, observing the precautions described in the article.
If you doubt whether you will be able to dye the fur yourself without damaging it, then give the item to dry cleaning, where they provide services for various dyeing.
