Welding inverter elitech ais. Elitech inverter welding machines

Designed for electric arc welding with a consumable coated electrode at direct current of low-carbon and high-carbon steel, stainless steel, cast iron

When conducting welding work In conditions of high humidity, confined spaces and cramped conditions (wells, tunnels, tanks, etc.), to comply with safety requirements, welding inverters with a built-in no-load voltage reduction device (VRD) are used, which ensures the electrical safety of the welder. The device reduces the open circuit voltage of the welding inverter to a safe value of 15 V when the welding circuit is opened and returns the inverter to its original state when the electrode touches the part.

Scope of delivery Welding machine ELITECH AIS220N

Designed for electric arc welding with a consumable coated electrode at direct current of low-carbon and high-carbon steel, stainless steel, cast iron For the first time in Russia, a new welding machine ELITECH AIS 220N with such capabilities and for such money.

Welding cable with electrode holder
Welding cable with ground clamp

Characteristics of welding inverter ELITECH AIS 220N

Protection class: IP 21
Insulation class: H
Cable connector: Dx25
Length network cable: 1.5 m
Light weight and dimensions for ease of use
Opportunity argon arc welding TIG
Long runtime (80% at maximum current)

Advantages of the ELITECH AIS 220N inverter

For the first time in Russia, a new welding machine ELITECH AIS 220N with such capabilities and for such money. Designed for electric arc welding with a consumable coated electrode at direct current of low-carbon and high-carbon steel, stainless steel, cast iron For the first time in Russia, a new welding machine ELITECH AIS 220N with such capabilities and for such money.

There are simply no analogues!

Cooks from 110 volts 2nd, from 140 volts 3rd.
An indestructible device, 1 out of 1,000 fails.
The board is filled with a compound (competitors have no analogues) and is not afraid of either moisture or construction dust.
Very compact – the size is comparable to a loaf of bread! There is simply no machine of this size in Russia with a REAL welding current of 220 amperes.
At the same time, very high productivity (at T = 25°, C) is 80%.
The factory that makes these welders, is China's No. 1 factory in quality welding equipment production. It produces for world leaders ESAB and Lincoln Electric, precisely under the brands of these companies. And not like other factories that make for the Lincoln Electric company, but under its other brands of lower quality.
Welding cable with electrode holder,
Welding cable with ground clamp.
Voltage: 220 V
Welding current range: 10-220 A
Duty cycle at maximum current: 80%
Welding current, max: 220 A
Welding current, min: 10 A
Voltage: 220 V
Operating voltage range: 220 (-50%,+25%)
Electrode diameter (max): 6.0 mm
Electrode diameter (min): 1.6 mm
Open circuit voltage: 74 V
Power: 5.6 kW
Protection class: IP21
Insulation class: N
Dimensions: 230x120x170 mm

Welding inverter model Elitech in its own way schematic diagram no different from other similar products used in everyday life. Here, the required current strength is obtained largely due to the conversion of currents with high frequencies. Thanks to this technology, it is possible to use a transformer of small size. For example, to obtain a current whose strength will be equal to 160 A, you will need a transformer weighing only 250 g, while on classic welding devices with similar indicators you will have to use a transformer weighing about 18-20 kg.

Positive and negative points of inverters

The Elitech ais 200 welding inverter is lightweight. The design provides everything necessary for working with AC or DC electrodes. This is very important if you need to weld workpieces made of non-ferrous metals or cast iron. The Elitech inverter device has a fairly wide range of current adjustment, and this is very simple to do - you just need to turn the corresponding knob on the surface of the case. Thanks to this characteristic, it is possible to use a special non-consumable electrode, which will fuse the edges of the elements being connected. This type of welding can be used to join refractory materials.

Such equipment has a hot start function, when the electrode is ignited using the most high strength current

There is a special design to prevent the electrode from sticking and causing a short circuit. One of the main disadvantages of the Elitech welding inverter is its high cost. In particular, these products will cost approximately twice or three times as much as transformers. One more inverter apparatus is the fear of dust.

Professional welders advise removing the housing casing at least twice a year and carefully removing dust. If the work will be carried out in dusty rooms, it will have to be cleaned as it gets dirty.

Like any other electronics, the inverter does not withstand low temperatures very well. If environment If it cools down to -15 degrees, it will be impossible to use this device. However, there is equipment on sale that can withstand up to -30 degrees - it depends on technical characteristics devices. The maximum length of each cable should be a maximum of 2.5 meters.

Basic operational properties of the device

Welding Elitech devices can be used for a range of welding work:

welding with consumable electrodes, carried out in air or in an environment consisting of a special protective gas;
argon arc welding using non-consumable tungsten electrodes;
welding with consumable electrodes with a special coating;
soldering of polypropylene pipes intended for assembling water supply or sewerage networks.

Elitech welding inverters, depending on the need, can produce both alternating and direct current. If the product will be used in industrial production

, it will have a number of advantages.
It is allowed to use the equipment at low voltage.
Even when operating at maximum power, this equipment can operate for a long time. It rests quite quickly, which greatly increases the efficiency of the device.
Thanks to special knobs on the panel, you can not only adjust the current strength, setting it to the required value, but also keep it under constant control.

It is characterized by small overall dimensions and low weight. For ease of transportation, the equipment is equipped with a special handle.

In addition to the listed characteristics, this inverter has a special built-in microprocessor that controls the functioning of all digital boards. If the overheating protection suddenly triggers, it automatically turns off the voltage supplied to the cables and turns on the signal LED.

Description of the inverter welding machine ELITECH AIS 200 Single-phase, portable, DC welding inverter Elitech AIS 200 with air cooling for MMA welding . Optimal for long-term work at maximum current, repair and restoration and construction in buildings, car services and production. Suitable for operation from alternative sources energy such as a generator. Operates without loss of power during network fluctuations from 160 to 250 V.

performance at maximum current 60%
arc afterburner automatic +20 A (increased current pulse facilitating ignition of the electrode)
smooth adjustment of the welding mode in a wide range of currents and voltages
forced air cooling
overload protection (automatic shutdown of the inverter during prolonged operation at maximum current, followed by forced cooling)
high level of electrical safety due to double insulation
copper cables, electrode holder and ground clamp included
metal case
equipment: welding machine, 3 m welding cables, electrode holder, ground clamp

Specifications

Mains voltage	230 V/ 50 Hz/ 1 phase
Max power consumption
Max no-load voltage
Welding current
Electrode diameter
Work cycle

Arc Fast and Furious
Insulation class
Degree of protection
Dimensions	371x155x295 mm

RUB 12,120
Buy
The ELITECH welding inverter produces electric arc welding with a consumable electrode and argon-arc welding with direct current. Long-term work at maximum current is possible, repair
RUB 10,920
Buy
The welding inverter produces electric arc welding with a consumable electrode and argon-arc welding with direct current. Long-term operation at maximum current is possible,
RUB 16,440
Buy
Single-phase welding inverter Elitech AIS 170 is designed for manual arc welding with stick consumable electrodes (MMA). The control panel is equipped with a digital display for easy setup of the welding product. Used for welding carbon, stainless steels and cast iron.
RUB 12,416
Buy
Single-phase welding inverter Elitech AIS 210 is designed for manual arc welding with stick consumable electrodes (MMA). The control panel is equipped with a digital display for easy setup of the welding product. Used for welding carbon, stainless steels and cast iron.
RUB 15,750
Buy
The ELITECH AIS 160A welding inverter is designed to perform welding

for welding metal of medium thickness.
Out of production.
RUB 7,260
Buy
The ELITECH AIS 200A welding inverter is designed to perform welding
works on metal coated with a piece electrode with a diameter of 1.6 to 4 mm. Fits
for welding metal of medium thickness and
RUB 13,320
Buy
The Elitech IS 180 welding inverter is used for manual arc welding with piece consumable electrodes with a diameter of up to 4 mm. Excellent for household needs and can be used for welding carbon steel, stainless steel and cast iron. The ability to operate at reduced voltage – 160 W allows the inverter to be used in places with unstable voltage: in rural areas, gardening, garages, etc. It can operate both from the mains and from a generator. Has a high percentage of on-time. Usage modern technology“IGBT” in the production of the Elitech IS 180 inverter allows you to obtain a stable arc and a high-quality weld.
RUB 6,360
Buy
The Elitech IS 200 welding inverter is used for manual arc welding with piece consumable electrodes with a diameter of up to 5 mm. Excellent for household needs and can be used for welding carbon steel, stainless steel and cast iron. The ability to operate at a reduced voltage of 160 W allows the inverter to be used in places with unstable voltage: in rural areas, gardening, garages, etc. It can operate both from the mains and from a generator. Has a high percentage of on-time. The use of modern IGBT technology in the production of the Elitech IS 200 inverter allows us to obtain a stable arc and a high-quality weld.
RUB 7,457
Buy
The Elitech IS 220 welding inverter is used for manual arc welding with piece consumable electrodes with a diameter of up to 5 mm. Suitable for both domestic needs and professional use for welding thick metals. Can be used for welding carbon steel, stainless steel and cast iron. The ability to operate at a reduced voltage of 160 W allows the inverter to be used in places with unstable voltage: in rural areas, gardening, garages, etc. It can operate both from the mains and from a generator. Has a high percentage of on-time. The use of modern IGBT technology in the production of the Elitech IS 220 inverter allows us to obtain a stable arc and a high-quality weld.
RUB 7,500
Buy
The Elitech IS 250 welding inverter is used for manual arc welding with piece consumable electrodes with a diameter of up to 6 mm, so it is suitable for professional use, for example, in auto repair shops, companies manufacturing metal structures, and for household needs. Can be used for welding carbon steel, stainless steel and cast iron. The ability to operate at a reduced voltage of 160 W allows the inverter to be used in places with unstable voltage: in rural areas, gardening, garages, etc. It can operate both from the mains and from a generator. Has a high percentage of on-time. The use of modern IGBT technology in the production of the Elitech IS 250 inverter allows us to obtain a stable arc and a high-quality weld. The Elitech IS 250 welding inverter is the most powerful of the IS line, with a maximum welding current of 220A.
RUB 7,800
Buy
The Elitech IS 160 welding inverter is used for manual arc welding with piece consumable electrodes with a diameter of up to 4 mm. Excellent for household needs and can be used for welding carbon steel, stainless steel and cast iron. The ability to operate at a reduced voltage of 160 W allows the inverter to be used in places with unstable voltage: in rural areas, gardening, garages, etc. It can operate both from the mains and from a generator. Has a high percentage of on-time. The use of modern IGBT technology in the production of the Elitech IS 160 inverter allows us to obtain a stable arc and a high-quality weld. Due to its light weight of 4.5 kg it can be quite mobile. The Elitech IS 160 welding inverter is the lightest and most economical in the line of IS welding inverters.
RUB 5,820
Buy

Welding of fittings, metal structures, thin and medium metal sheets, pipes of different diameters, including polypropylene pipes, as well as other products can be carried out using inverter-type welding machines. These high-tech devices are used during installation, construction and repair work, in the food and chemical industry, as well as in auto repair shops. Single-phase and three-phase devices are used by both professionals and home craftsmen when carrying out welding work at home or in the country.

Elitek welding inverters: a wide selection of excellent equipment

Using Elitech welding inverters, you can carry out several types of welding.

Welding using consumable electrodes, as well as in a protective environment (argon) flux-cored wire (MIG/MAG).
Argon arc welding, which uses tungsten electrodes (TIG).
Arc welding, which uses coated metal electrodes (MMA).
Welding of polypropylene pipes used in the installation of water supply and sewer networks.

Depending on the device used, work can be carried out on alternating or direct current.

The Elitek professional welding inverter has many advantages, thanks to which the device is in demand among consumers.

The devices are capable of operating at low voltage, and this allows welding to be carried out where the voltage is significantly lower than the normal level.
The operating cycle of inverter devices is from 40 to 80 percent, which allows them to be used for a long time at maximum current.
Thanks to a special control panel, it is possible to regulate and control the current and voltage.
Relatively light weight, small dimensions and a comfortable handle make the devices quite easy to transport.

As for the power of Elitek welding inverters, it depends on the type and model of the device and can range from 2.9 to 5.9 kW.

Have you decided to buy an Elitech inverter welding machine? Our online store sells welding inverters various types in any configuration. We are the official dealer of ELITECH Corporation, so the prices for our products are quite reasonable. In our catalog you can see the characteristics of the equipment we sell.