General provisions

1.1. The regulations for checking the texts of final qualifying works for the amount of borrowing were developed with the aim of establishing a procedure for checking for the amount of borrowing the texts of final qualifying works (FQR) of students in bachelor's degree programs, specialty programs and master's programs (hereinafter referred to as students) at the Federal State Autonomous Educational Institution of Higher Education "Russian State Professional Educational Institution" Pedagogical University" (hereinafter referred to as the university, or RSPPU) and identifying unauthorized borrowings.

1.2. Checking the texts of the academic examination for the amount of borrowing is carried out in accordance with the requirement of paragraph 38 of the Procedure for conducting state final certification for educational programs of higher education - bachelor's programs, specialty programs and master's programs, approved by order of the Ministry of Education and Science of Russia dated June 29, 2015 No. 636.

1.3. Checking the texts of the thesis for the amount of borrowing is carried out in order to control the degree of independence and improve the quality of students’ performance of the essays, as well as to increase the level of their self-discipline and compliance with intellectual property rights.

1.4. Unauthorized borrowing (plagiarism) is understood as non-independent performance of written work, that is, the use of someone else’s text, published on paper or electronic media, without reference to the source or with references, when the volume and nature of borrowing cast doubt on the independence of the work as a whole or any - or from its sections or parts.

The following types of plagiarism are recognized:

Verbatim reproduction of someone else's text;

Paraphrase is the reproduction of someone else’s text with the replacement of words and expressions without changing the content of the borrowed text.

1.5. Legal borrowing means the use in the text of the names of institutions, government bodies and local self-government; links to regulatory legal acts; texts of laws; lists of references; repetitions, including frequently repeated set expressions and legal terms; quoting text, excerpts from documents for their analysis.

1.6. Checking the texts of the thesis for the amount of borrowing at the university is carried out using the Antiplagiat.VUZ system (http://rsvpu.antiplagiat.ru/). Registration of system users and management of access rights is carried out by specialists from the information network development and technical support department (hereinafter referred to as the RISiTS department) of the Office of Information Development and Information Educational Technologies (UIIOT) of the RSPPU.

1.7. Reports from the Antiplagiarism.VUZ system are the information basis for decision-making by heads of graduating departments on admission of academic excellence to public defense and assessment of academic excellence by heads and members of state examination commissions (SEC).

CHECKING PROCEDURE IN THE ANTI-PLAGIATUS.VUZ SYSTEM

2.1. No later than a week before the preliminary defense of the thesis, students submit to the head of the thesis an electronic version of the thesis text in Microsoft Office Word format in one file.

2.2. The head of the thesis, no later than three working days from the moment the student submits the file with the text of the thesis, checks the text of the thesis for the amount of borrowing using the Antiplagiarism.VUZ system.

2.3. The result of checking the text of the final qualification work is recorded in the Certificate on the results of checking the text of the final qualifying work for the amount of borrowing (see Appendix) and signed by the head of the final qualification work.

The procedure for admitting thesis to public defense after verification USING the "Antiplagiarism.VUZ" system

3.1. A student is admitted to preliminary defense and public defense of the thesis in the State Examination Committee if it contains at least 50% of the original text for the works of bachelors and specialists and at least 60% for the works of masters.

3.2. If there is a smaller volume of the original text, the thesis is sent to the student for revision while maintaining the previously approved topic and is then subjected to re-checking no later than 10 days before the start of the work of the State Examination Committee on the protection of the thesis.

3.3. After re-checking, in case of unacceptable volumes of borrowed text, the thesis will not be allowed to be defended in the current academic year.

3.4. The head of the department, upon the written recommendation of the head of the thesis, has the right to admit the thesis with a smaller share of the original text to the defense if the analysis of the audit report using the Anti-Plagiarism.VUZ system confirms the independence of the thesis.

3.5. A certificate of the results of checking the text of the final qualifying work for the amount of borrowing is submitted to the State Examination Committee for the defense of the thesis along with a set of other documents, and the results of the check are taken into account when issuing the final grade for the defense of the thesis.

Document storage procedure

4.1. The original Certificate of the results of checking the text of the final qualifying work for the amount of borrowing is stored together with the thesis in the manner established by the regulatory documents of the university.

Vice-Rector for Informatization _____________ A.A. Karasik

AGREED:______________________________________________________________

Application

Federal State Autonomous Educational Institution
higher education

"Russian State Vocational Pedagogical University"

REFERENCE

ABOUT THE RESULTS OF CHECKING THE TEXT OF THE GRADUATE THESIS FOR THE AMOUNT OF BORROWING

In accordance with the Regulations currently in effect at the RSPPU for checking the texts of final qualifying works for the amount of borrowing, approved by the rector ___________ No. __________ and based on the requirements of paragraph 38 of the “Procedure for conducting state final certification for educational programs of higher education - bachelor’s programs, specialty programs and master’s programs”, approved By order of the Ministry of Education and Science of Russia dated June 29, 2015 No. 636, using the Antiplagiat.VUZ system (http://rsvpu.antiplagiat.ru/), a check was carried out to determine the amount of borrowing of the student’s thesis text

Course, group __________

(last name, first name, patronymic in full)

on the topic "______________________________________________________________________

_____________________________________________________________________________».

(topic of final qualifying work)

According to the results of the check, the share of the original text of the work is _______%.

A printout of the inspection report of the Antiplagiat.VUZ system is attached.

Performed the check:

head of research and development work

_________________________________ ______________ ____________________

position, department signature full name

"____"____________ 20___

Report on checking the Antiplagiarism.VUZ system

Dear user!

Please note that the Anti-Plagiarism system answers the question whether one or

another piece of text borrowed or not. The answer to the question whether borrowed

the fragment is plagiarized and not a legitimate quotation, the system leaves it at your discretion.

It is also important to note that the system finds the source of the borrowing, but does not determine

Is it the original source?

Document information:

Source file name:

Name of the company:

Document type:

Document name:

Check date:

Search modules:

Text

statistics:

Readability Index:

Unknown words:

Max. word length:

Big words:

Original blocks:

Borrowed blocks:

Borrowing from "white" sources:

Final score of originality:

To prove the uniqueness of the text, sometimes certain difficulties arise, which help from Anti-Plagiarism can help solve. Next we will talk about what kind of “certificate” this is and how you can get it.

Currently, writing texts is very important for many companies. Of particular importance is that the finished text must be unique (not similar to other texts on the entire Internet).

You can check the uniqueness of any text (document or picture) using special services designed to search for similar texts. Among such services: Text.ru, Content-Watch, AntiPlagiatus, ETXT, etc.

The concept of anti-plagiarism

What is anti-plagiarism? Anti-plagiarism is a thorough online check of your text against a copy on the Internet. If, when checking the text, the system finds a matching part or the entire text is identical on another site, the Anti-Plagiarism system will notify you about this.

Today, Anti-Plagiarism has become a truly national program that can evaluate the uniqueness and quality of written works. To check your work, you need to register on any service convenient for you - this will allow you to check the uniqueness as many times as you need.

But you need to take into account that each service has its own number of verification attempts. First of all, you need to learn how to work with such services. It’s worth understanding the algorithm of the service you choose.

After your work has been polished, the verification system offers you the percentage of uniqueness of your text. Most often, such services are used by students to write coursework, diplomas or dissertations, or by copywriters, whose texts they transfer to companies/employers.

In some situations, users need confirmation that their robot has passed uniqueness. This confirmation is also called a certificate from Anti-Plagiarism. Such a certificate can be ordered from companies that themselves check your work, after which they will provide you with an official conclusion on originality.

Of course, this service may not be free. But you can do such a certificate yourself - it is a fairly simple procedure, and it consists of several steps.

Structure of creating help from Antiplagiarism

• First you need to register on the Antiplagiat website (antiplagiat.ru). But if you have another program, then you just need to download and install it on your PC, and you don’t need to register;
• Next you need to upload your work;
• after which it needs to be checked (run the check);
• when the robot has already been checked, you receive a detailed report (number of words, total number of characters, number of characters without spaces, presence of spelling errors).

In the Antiplagiat.ru system you can take a screenshot of this report. If you have paid according to the tariff, then you have the additional opportunity to download the report in pdf format. Other services may offer you to save the file in docx format.

Paid or free

Please note that in order to receive a full inspection report, you will need to make a payment. Payment can be per day, week or month. It is important to remember that Antiplagiat.ru checks texts exclusively in Russian.

If you need to check the text, for example, in Ukrainian, then it is best to use other services, for example, ETXT. If you need a certificate for Antiplagiarism.university, you can check the document only at the university, and only with the teacher.

If you need an official certificate from Anti-Plagiarism, then you can order such a document from companies that specialize in this. Their task is not only to check your work for uniqueness, but upon your request they will also be able to issue you a certificate of uniqueness.

The letterhead will contain complete information about the robot, as well as a stamp and signature. This is what the official Aniplagiarism certificate looks like.

Good day!

What is plagiarism? Typically, this term refers to non-unique information that they try to pass off as their own, while violating copyright law. Anti-plagiarism - this means various services to combat non-unique information, which can check the text for its uniqueness. In fact, such services will be discussed in this article.

Remembering my student years, when some of our teachers checked coursework for uniqueness, I can conclude that the article will be useful to everyone whose work will also be checked for plagiarism. At the very least, it’s better to check your work yourself in advance and correct it than to retake it 2-3 times.

So, let's begin…

In general, you can check text for uniqueness in several ways: using special programs; using sites that provide such services. Let's consider both options sequentially.

Programs for checking text for uniqueness

1) Advego Plagiatus

One of the best and fastest programs (in my opinion) for checking any texts for uniqueness. Why is she attractive:

Free;

After checking, non-unique areas are highlighted and can be easily and quickly corrected;

It works very quickly.

To check the text, just copy it into the program window and click the check button. For example, I checked the introduction of this article. The result is 94% uniqueness, which is not bad (the program found some frequently occurring phrases on other sites). By the way, sites where the same pieces of text were found are displayed in the lower window of the program.

2) Etxt Antiplagiat

An analogue of Advego Plagiatus, however, text checking takes longer and is checked more thoroughly. Typically, in this program the percentage of text uniqueness is lower than in many other services.

Using it is just as simple: first you need to copy the text into the window, then click the check button. After a dozen or two seconds the program will display the result. By the way, in my case, the program gave the same 94%...

About online anti-plagiarism services

There are actually dozens (if not hundreds) of similar services (sites). They all work with different verification parameters, with different capabilities and conditions. Some services will check 5-10 texts for you for free, the rest of the texts only for an additional fee...

In general, I tried to collect the most interesting services that most inspectors use.

The service is not bad enough, it works quickly. I checked the text in literally 10-15 seconds. There is no need to register to check on the site (convenient). When typing text, it also shows its length (number of characters). After checking, it will show the uniqueness of the text and the addresses where it found copies. What is also very convenient is the ability to ignore a site when checking (useful when you check the information that you posted on your site to see if anyone copied it?!).

To start working on this service, you need to register (you can use registration on some social network to log in: VKontakte, Odnoklassniki, Twitter, etc.).

You can check either a simple text file (uploading it to the site) or simply copying the text into the window. Quite convenient. The check is done quite quickly. For each text that you uploaded to the site, a report will be provided, it looks like this (see picture below).

3) http://pr-cy.ru/unique/

Quite a well-known resource on the Internet. Allows you not only to check your article for uniqueness, but also to find the sites on which it was published (in addition, you can indicate sites that do not need to be taken into account when checking, for example, the one from which the text was copied :)).

The check, by the way, is very simple and fast. You don’t need to register, but you also don’t need to expect more information from the service. After checking, a simple window appears: it shows the percentage of text uniqueness, as well as a list of website addresses where your text is present. In general, it’s convenient.

Free online text checking, no need to register. It works very quickly, after checking it provides a report with the percentage of uniqueness, the number of characters with and without problems.

A very good plagiarism checking service. Works with Yahoo and Google search engines (the latter is available after registration). This has its pros and cons...

As for the actual check, there are several options: checking plain text (which is the most important for many), checking a page on the Internet (for example, your portal, blog), and checking a finished text file (see the screenshot below, red arrows) .

After checking, the service provides a percentage of uniqueness and a list of resources where certain sentences from your text were found. Among the disadvantages: the service takes quite a long time to think about large texts (on the one hand, it’s good - it checks the resource qualitatively, on the other, if you have a lot of texts, I’m afraid it won’t suit you...).

That's all. If you know any other interesting services and programs for checking for plagiarism, I will be very grateful. All the best to everyone!

The manual contains information about the purpose, capabilities, features of the system, as well as a description of actions that ensure checking text documents for the presence of borrowings.

Terms and Definitions

	Definition
	An online tool for working with text documents with a user interface on a website.
Borrowing	A fragment of the text of the document being checked that coincides or almost coincides with a fragment of the text of the source and is not formatted in accordance with the rules of citation, without providing complete bibliographic information about the source.
Citation	A fragment of the text of the document being checked, coinciding or almost coinciding with a fragment of the text of the source and formatted in accordance with the rules of citation, with complete bibliographic information about the source. Citations also include commonly used expressions, bibliographic lists, and fragments of text found in sources from collections of normative and legal documentation.
Borrowing percentage	The share of all borrowings found in relation to the total volume of the document in characters.
Citation percentage	The share of citations found relative to the total length of the document in characters.
Percentage of originality	The share of text fragments of the document being checked that were not found in any source used for checking, in relation to the total volume of the document in characters.
	The result of checking the text for borrowings: Brief report - represents the percentage of originality, a list of sources of borrowing. Full report - represents the percentage of originality, a list of borrowing sources, the downloaded document text, marked with the borrowing blocks found.
Share in the report	The ratio of the volume of borrowings, which is taken into account within this source, to the total volume of the document. If the same text was found in several sources, it is taken into account only in one of them.
Share in text	The ratio of the volume of borrowed text from a given source to the total volume of the document. Shares in the text according to sources are not summed up.
Blocks in the report	The number of borrowing blocks from a source, taking into account the intersections of all found sources.
Blocks in text	The number of borrowing blocks from the source, excluding other found sources.
Search module	A software module that implements the search for borrowings. The module uses a search index or a special computational algorithm to generate reports. The system may have several modules. After gaining access to several search modules, you are given the opportunity to conduct checks, build both separate reports and a single report for all search modules. Some modules perform searches in specialized databases with snapshots of the texts of source documents, but gaining access to the selected search module does not mean gaining access to the full texts of documents that this module can find. The received reports will contain links to documents (their names will also be given), and when viewing the source text, it will contain fragments that match the document being checked.
	Software that allows users to view pages on Internet sites and access files and software associated with those pages. For example, Internet Explorer, Google Chrome, etc.
Text metrics	Semantic characteristics for each downloaded document.

Purpose and conditions of use

The service is designed to check text documents for borrowings. As a result of the scan, users receive scan reports. The report contains information about the sources and indicators of borrowing by source, as well as detailed information indicating those fragments of the document being checked that were identified as borrowing. Identification is accompanied by the presentation of a matching fragment of text from the borrowing source and/or a link to the original (URL). As a result of document verification, the user is provided with information that helps to determine which part of the document was written independently and which part was borrowed.

To use the service you need:

• Connect to the Internet.
• Install a browser or use one of the most common types of browser built into your operating system (MS Internet Explorer version 11 and higher, Mozilla Firefox version 58 and higher, Opera version 51 and higher, Chrome version 64 and higher).

The results of working with the Anti-Plagiarism system are not the basis for claims of copyright infringement; the service is intended to be used solely for informational purposes. In other words, we do not declare that a particular text is plagiarized, but only inform you that the same or similar fragment of text exists. It is possible that when working with the service you will find text with a copied fragment from other sources, including the possibility that the document you downloaded is the original source. In any case, when working with the service, be careful, try to be objective and do not rush to conclusions. Remember that the service is only a work tool, and only the system user himself can give a real assessment of the document.

Preparing for work

Workplace

To prepare a workplace when working with the Anti-Plagiarism system, just open your browser. To work with the service, the most common types of browsers can be used, such as MS Internet Explorer version 11 and higher, Mozilla Firefox version 58 and higher, Opera version 51 and higher, Chrome version 64 and higher.

To get started, go to the service website by entering the address of the system website in the address bar of your browser.

So, we have a ready-made workplace:

• files are downloaded to the computer;
• browser is open;
• The service website page is open in the browser.

User registration

To register on the site, open the registration window by clicking on the “Register” button on the main page of the site.

“Register” and “Login” buttons

In the window that opens, you will be asked to read the user agreement and the agreement on the processing of personal data. To accept the user agreement, check the box next to “I agree to the terms...”. Acceptance of the agreement means that you have read, understood and unconditionally accept the terms of the user agreement and the agreement on the processing of personal data.

To continue registering in the system, enter your email address and click on the “Register” button.

Initial registration form

After some time, an email with a password will be sent to the email address you specified; enter the received password to enter your account.

If your email was used for registration previously, you will not be able to register using this email again. In this case, use the login form to access the system.

If the letter does not arrive by mail for a long time, try the procedure again. Make sure your email is entered correctly.

Login and logout

If you are a registered user, then use the login form to access the system; to do this, click on the “Login” link in the upper right corner of the page.

Enter your credentials in the login form that opens. Click on the “Show Password” button if you want to check that you entered the password correctly. Next, click “Login.”

Login form

After logging in on any page of the site, the “Menu” icon is displayed in the upper right corner of the page. By clicking on the icon, you can navigate through the sections of your account. To the left of the “Menu” icon you will see brief information about yourself: your role in the system and e-mail.

To log out, click on the “Menu” icon and then select “Log out”.

You can use social networks to log into your account. More details in the next paragraph.

Social media

When registering or regularly logging into your personal account, you can attach your social network accounts. Attaching an account will allow you to quickly log into your personal account using your credentials from the social network.

A special window will open to confirm sending data from the social network. If you have not yet introduced yourself to the social networking site, this window will prompt you to log in.

You will then be redirected back to the registration completion form. You can choose: to attach a social network account to an existing account on the system website or to register a new account by attaching a social network account.

If you select the “I am a new user” option, the site will offer a registration procedure. Register and click the “Create account” button. You will be sent a password as during regular registration. Enter the password you received and click “Create an account” again to complete registration.

Once registration is completed, you will be able to log in using your attached account.

Registration form after submitting credentials from a social network, “I am a new user” tab

If the entered email matches the email address of your account or was automatically entered using the data received from the social network, then entering a password will not be required - you will be logged into your account immediately after clicking “Create an account.” In case the social networking site fails, a password will still be sent to the specified email. Using this email and password, you will be able to log into your account in the usual way.

If you selected the “I already have a login” option, then you will be asked to log in using your credentials with which you registered.

Registration form after submitting your social network credentials and clicking “I already have a login”

Password recovery

If you cannot access your personal account because you have forgotten your password, use the password recovery procedure.

To recover your password, in the login window, click on “Recover Password”.

In the window that opens, enter your email and click the “Recover” button.

Password recovery window

An email will be sent to you with instructions on how to reset your password and a link. Following these instructions, follow the link. Next, an automatically generated password will be sent to you by email. Use it and your e-mail to log in to your account.

Profile

To go to your profile, click on the “Menu” icon in the upper right corner and select the “Profile” section.

A profile is a special section of your account in which you can view and edit your account credentials and additional information.

In the “Profile” section you can enter your personal data and upload an image to be placed in the information block. To do this, enter your data in the fields and click the “Change” button, and to upload an image to your profile, click on “Upload image”. To return the standard portrait image, delete the uploaded picture in your profile by clicking on “Delete”.

Account section - “My Profile”

Change mail (email)

In order to change the email used to log in, enter your current password and your new email address and click the “Change” button.

By clicking on the button, you will see the message: “A link has been sent to your new email to confirm the email change.” Go to your mailbox, the address of which you specified as your new email, and then follow the link in the letter.

A letter received from the Antiplagiarism service website

Change Password

To change your password, you will need to enter your old password and then enter your new password in the appropriate fields.

You can first make sure that the password is entered correctly by clicking on the “Show password” button. After this, symbols will appear instead of dots.

If you are sure that you entered the password correctly, click on the “Change” button, and your password for accessing the Anti-Plagiarism service account will be changed to a new one.

If you made a mistake when entering a new password, you can use the password recovery procedure, but only if you have access to the mailbox specified in your profile.

Attaching a social network

You can log in to the system without entering an e-mail and password; to do this, you need to link your social network accounts to your profile. To attach a social network, just click on the “+” (plus) sign or the icon of the social network that you want to attach. After clicking, a social network window will open with a confirmation form for sending data; you need to confirm your consent to attach the social network.

Immediately after receiving your consent, the data necessary to enter your account is sent from the social network; now when logging in, you can use the “Login using a social network” icon.

On the “Profile” page, you can also perform the opposite action - unpin a social network account, to do this, click on the “X” sign located under the icon of the attached social network, or on the icon itself.

You can only attach one account from one social network. To attach a new account to a social network, you need to unpin the old account and then attach the new one.

Support

If you have not found answers to questions about working with the system, please contact the Support Service. To do this, click on “Menu” in the upper right corner and select the “Support Service” tab. The system will open a window with a form for sending a request.

Feedback form

Enter your question in the “Message” field and click on the “Submit” button. Our specialists will respond to your request via the email you used to log into the system.

Adding a site

Our Internet Search Module checks already explored areas on the Internet. If you find an interesting site or resource that is not included in the Internet Search Module, you can add it to our verification module. This will allow you to build more complete and reliable reports based on verification using the Internet Search Module.

To add a site for indexing, click on “Menu” and select “Add site”. Copy the link in the "URL" field and click "Add". You can also leave a comment about the site to which this link leads, for example, that this site hosts an open electronic library or an abstracts site.

Menu item “Add site”

If the site you specified is already known to our system, you will receive a message: “The site has already been processed by our system.”

Important! The submitted site will be included in the Internet Search Module over time in order of indexing queue.

Cabinet

The account provides the ability to upload and check documents. To access document verification, click on “Menu” and select the “Account” section.

On the account page you will see the “Folders” and “Documents” panels, with the help of which all basic actions are performed with folders and documents in the account.

Cabinet

Document verification

To upload documents for review, click the “Add Document” button and select files on your computer or drag and drop the required documents into the “Add Document” field.

In addition to downloading individual files, it is possible to download an archive folder. An archive folder means a file in RAR, ZIP or 7z format. In this case, all documents from the archive folder are processed separately.

After selecting the files, a window will open to configure document verification settings.

Window for adding one document

You can specify the parameters for saving the document and select the modules that will be used to check the document.

Important! For the title of the document, you can use the Russian, Belarusian and Kazakh alphabet.

If you do not enter parameters, the following default values ​​will be applied to the document: the folder that was opened when viewing the user account is selected, the document type is not specified, the name is the file name, all possible verification options will be set for search modules (depending on the connected services ).

Next, click on the “Continue” button, the document will be added to your account and sent for verification. In the folder to which the document was added, you will see the added document; in the line with the document, the date the document was uploaded will be indicated. After the check is completed, the results of the check will appear in the line.

Text checking

In some cases, it is more convenient and faster to use the text verification function; to do this, click on the “Add text” button. In the form that opens, enter or paste text into the field, select the modules for which the document will be checked, and then click the “Continue” button.

Adding text

After clicking the “Continue” button, a document will appear in your account, its name will be the same as the first word in the entered text (no more than 15 characters), then a check will start against this document.

Re-checking the document

If you want to check a previously downloaded document using other search modules, then you can use re-check. Mark the selected document with a checkmark, then in the top menu click on the “Recheck” button.

Marked documents for re-checking

In the window that opens, select search modules and click the “Continue” button.

The document will be sent for verification and after a while the results will appear in the document line. It is impossible to send a document for re-checking if it is still being checked.

Viewing and editing document information

Each document, when added or moved to the office, must be placed in some folder in the office. By clicking once on the name of the folder that contains documents, you will see the documents located inside the folder.

General view of the user account with uploaded documents and created folder structure

Documents are arranged in the form of a list. Each line of the list displays information about the document, the result of the check and a link to the report.

The assessment of originality in a document line is intended for an initial, superficial acquaintance with the results of the verification. To receive a detailed assessment of the inspection results, go to view the inspection report by clicking on the “Report” button.

To view information about a document, open the folder, select the document you need with a checkmark and click the “Information” button in the top menu. A window will open with document attributes and information about the date and duration of the download.

To view the text of a downloaded document, click on its name in the list of documents. The Reading Version page opens, displaying the text of the document in page-by-page mode.

To navigate through pages of text, use the paging bar located above and below the text field. You can display all pages of a document at once by clicking the “Show all pages” button under the text field.

Also on this page you can view the document attributes and change them if necessary by clicking on the “Change name and type” button.

View information about a document

The same operation can be performed by selecting the desired document in the account and clicking the “Change name and type” button in the top menu. In the window that opens, you can change the document name and assign a document type.

Move a document

To maintain a hierarchical folder structure, use the “Folders” panel, displayed on the left in your personal account. The “Folders” panel contains active elements and buttons that allow actions with folders: adding, deleting (if the folder contains documents, they will also be deleted), renaming and moving the folder, as well as navigating through folders.

By default, a “Root folder” is automatically created in each account; all other folders are created in it; this folder cannot be deleted, moved or renamed.

To the right of the folder names you will see a numerical value - this is the number of documents in the folder, so you can further navigate the distribution of documents in the folder.

To move a document from one folder to another, select the document with a checkmark (you can select several documents to move), then click on the “Move” button in the top panel.

A navigation window will open showing the folder structure. Select the destination folder and click Continue, then the document will move to another folder.

Window for moving document(s)

Search for a document

To search for a document, enter the name of the document in whole or in part in the search bar, and then click on the button in the form of a magnifying glass or the Enter key.

Document search string

After starting the search, the list of documents will display the found documents for all folders nested inside the root folder. You can navigate through folders by leaving the request in action, then only documents on request will be visible in the folders.

Deleting a document

To delete a document from your account, check the box and click the “Delete” button in the top panel.

Removing a document from your account

Text metrics

The system provides for the calculation and display of various semantic characteristics for each downloaded document. This functionality allows you to evaluate the scientific nature of the text, determine the presence of certain sections of the document and calculate some indicators

Metrics are calculated automatically when loading a document. List of calculated semantic characteristics:

Borrowing check report

Full report

Once the document has been downloaded and verified, the user can proceed to the report. To go to the page for viewing the full report, you must click the “Report” button located on the line with the verified document.

The full report includes:

• assessment of originality/borrowing/citation;
• assessment of suspiciousness and the ability to go to the suspicious page;
• a list of sources of borrowing with the ability to edit and go to a report on the source;
• continuous or page-by-page display of the full text of the document being checked, highlighting the borrowed blocks found;
• date of document verification;
• displaying report adjustments.

The figure below shows an overview of the full report.

Full report

• report export;
• go to the user manual;
• saving the edited report;
• receiving a direct link to the report;
• viewing text metrics;
• View report history.

View the report

The report page consists of the text being checked, in which blocks of borrowings are highlighted, a list of sources, aggregated test results and navigation through blocks of borrowings (search by block).

To navigate through pages of text, use the paging bar located above and below the text field. To display all pages of a document at once, click on “Show all pages” at the bottom of the document page.

To see which specific fragments of text were borrowed and from which specific source, in the system all blocks of borrowings are highlighted in color, and at the end of each block there is a label with the serial number of the source.

When viewing borrowed blocks in a report, you can use block navigation (block search). Using it, you can go to the next or previous block by clicking on the “Previous” or “Next” buttons. You can also choose which blocks to navigate through – the quoting or borrowing blocks.

View source information

To view information about a source, expand the source you are interested in in the list of sources and click on the icon.

Source information in the source list

Parameters such as the share in the text, the number of blocks in the report, the number of blocks in the text are customizable. To do this, click on “Menu”, select the “Profile” section and go to the “Report Settings” tab. You can choose which options will not appear in the report by unchecking one of them.

Report settings

Another way to view information about a source is to click on the source number in the text of the full report. A window will appear containing basic information about the source.

Information about the source in the text of the full report

External source link

For most sources, an external link to the online location of the document or source text is available in the report source list.

A situation may arise when, when following a link, the source is unavailable. Perhaps the site administrators deleted the text, or the page “moved”. But in any case, this text was available at the specified address when the site was added to the index of the search module of the Anti-Plagiarism system.

The fact that one or more links to open sources on the Internet given in the report do not work at the time of viewing the report is not grounds for removing these links from the system index. The texts at these addresses were indexed; before they were deleted/moved, they were available to third parties and could be read, copied or otherwise used. In particular, they could be stored in the caches of search engines and web archives, where they can still be found.

View a report by source

To view a report by source, click on the link in the source name in the list of report sources. A page with the text of the source with which there was a match will open in a new tab in the browser. Instead of text that does not overlap by source, you will see a certificate about the number of missing characters.

If you want to view the source text in full, open the source link by clicking on the “Go to source site” button.

Source report

Click on another source in the Sources panel on the left to view a report for that source at once.

You can choose to view the report by source - page by page or in continuous text. By default, the source report is displayed page by page. To switch viewing mode, click on “Show full text”. When you switch to continuous text view mode, the button will change to “Show text page by page.” Click it to switch to page view mode.

Another way to view the source report is to go to the source report from the in-text citation block. Click on the source number at the end of the block, then click on the source name.

Go to the source report from the citation block

The Source Report page will open and the corresponding borrowing block will be shown at the top of the page.

Viewing report history

When you recheck a document or edit a report, all previous versions of reports are saved in the system. To view the report history, click the “More” button and select “Report History” in the top menu of the full report.

Viewing report history

A separate window will open where you will see brief information about all generated reports for this document. Reports in history are sorted in descending order of creation date.

To go to a detailed view or adjustment of one of the reports, click on the “Open” button. The report will open on a new page.

Report history

You can also view all report adjustments, go to a specific adjustment and change it. The adjustment is created automatically when editing the report.

Information about the edited report in the report history

Editing the Source List

In the full report, actions with sources are available, allowing you to make some changes in the calculation of the test results.

• Adjusting the list of sources taken into account in the report – allows you to take into account or not take into account the sources you specify in the report.
• Change Source Type – Allows you to change the source type of your choice.

To ignore sources, in the list of sources, uncheck the lines of these sources, and then click the “Recalculate” button. After recalculation, the overall score for the report will change, and the text of the report will no longer display citation blocks for this source.

To take the source into account again in the report, return the checkboxes and click “Recalculate”.

Adjusting the list of sources taken into account in the report

The system divides sources into two types: “Citations” and “Borrowings”.

When generating reports, the system automatically sets the source type: “Borrowings” - orange and “Citations” - green.

Important! The service makes only a preliminary assessment; only the user can give a real assessment of the source.

You can change the source type from “Citation” to “Borrowing” and vice versa. To change the source type from Borrowed to Cited, in the list of sources in the report, click on the orange percentage. The “Mark as correct borrowing” item will appear next to the cursor; click on it, then the “Recalculate” button.

Changing the source type

If you are satisfied with the current version of the report, you can save the report by clicking the “Save” button in the top panel of the document. A window for saving the edited report will open, in which you can leave your comments, for example, information about changes made to the report or the reason for the changes. After saving, a new adjustment will be created in the report history.

If the report was edited and the editing results were recalculated, it will be saved automatically; you can find the autosaved report in the report history and continue working with it. In the report history, autosaved reports have the following inscription in the comments: “Autosaved version.”

Brief report

The summary report presents the distribution of percentages of originality, borrowing and citation, as well as a list of sources of borrowing.

Brief report

For most sources, the report source list displays an external link to the location of the source document or text on the Internet. To go to the Internet page, click on the icon next to the source name.

In the top panel of the page you will see icon buttons that allow you to proceed to the following actions:

• outputting the report to a page for printing;
• downloading this report;
• viewing report history;
• link to user manual;
• return to the office to the list of documents.

To obtain more detailed information about the results of this audit, open the full audit report by clicking on the “Full Report” button.

Suspicious document

A suspicious document is a document in which signs of technical means of changing the text or format were detected, for example, replacing characters, inserting invisible text, etc. Such signs may indicate that the author tried to circumvent the system in order to hide borrowings and artificially increase the percentage of originality. If such signs of circumvention were found in a document, then a special mark will be placed for it in the user’s account and the general list of company documents.

Displaying a suspicious document in your account

Important! If a suspicious flag appears, we recommend that you carefully read the scan report and any suspicious fragments found in the document. The functionality for detecting suspicious documents is an auxiliary analysis tool. The final decision always remains with the inspector.

Information that a document has detected signs of system bypass is displayed in scan reports, printable versions, and downloadable reports. The summary report for a suspicious document displays the page numbers on which potential attempts to circumvent the system were detected.

Brief report for a suspicious document

The printable version of the test report provides information about potential attempts to circumvent the system. The types of crawls and pages on which suspicious fragments were found are displayed here. Similarly, information is recorded in downloaded versions of reports.

Version for printing a report on a suspicious document

In the full report for a suspicious document, a special block is displayed with a mark of suspicion and a link to the “Suspicious Document” page - to go to the page, click “View”.

Full report for a suspicious document

Important! If the uploaded document does not have formatting, then instead of a link to the “Suspicious Document” page, the full report displays the page numbers on which potential attempts to bypass the system were detected.

The “Suspicious Document” page displays detailed information about the suspicious fragments found in the document. Here you can view the text of the document in the form in which it was loaded into the system (with the original formatting preserved). If a fragment is found on a document page that may be an attempt to bypass the system, it is marked in red.

Suspicious Document page

To view information about suspicious fragments for the entire document, click on the “In Document” tab in the right panel. To view page numbers, click on the desired crawl group name. To go to any of the listed pages, click on the desired number.

In Document Tab

The “On Page” tab provides information about suspicious fragments on the selected document page. To display certain types of walkthroughs, check the boxes for them, and uncheck the rest for others. Selected types of bypasses are highlighted in red on the page, and removed bypasses are underlined with a red line. To highlight all suspicious fragments on a document page at once, click on “Show all”. In order to deselect all suspicious fragments at once, click on “Hide All”.

It is also possible to view the crawl text if it was extracted during document processing.

View crawl text in the On Page tab

If the document does not contain crawls, you can unmark it as suspicious. To remove the mark, use the enable/disable button in the upper right corner of the Suspicious Document page. You can leave a comment explaining why you removed the suspicious flag. If you view the “Suspicious Document” page via a direct link, you will not be able to uncheck the suspicious flag.

Removing the suspicious flag

If you uncheck the suspicious flag:

• the corresponding icon will not be displayed in the account;
• the summary report will not display information about crawls;
• in the downloadable report forms and in the printable version, in the “Suspicious Document” section, information will appear that the suspicious mark has been removed and a comment will be displayed;
• in the full report you will see that the suspicious flag has been removed - the corresponding icon will turn gray;
• Access to the “Suspicious Document” page is maintained.

Disabled suspicious flag in full report

Uploading a report

Report upload confirmation window

The Export Report page opens. To start generating a report, click on the “Export” button. After a while, the button will change to “Download”. Click on the "Download" button to download the file. The download will start automatically, or a dialog box will open to download and save the file, depending on your browser settings.

In the downloaded report you will see information about the report and the downloaded document, a terminological block with the meaning of the concepts “Borrowings”, “Citations”, “Originality”, a list of sources and text with markings of citation blocks (if the user downloads the full report).

Direct link to the report

To get a direct link to the report, open the report and click on “More” in the top menu, then click on the “Direct link to the report” button. A new tab will open with the report in view mode. Copy the address in your browser's address bar to pass the link to someone else.

An external user who follows a direct link will be able to view the report and text metrics (if this function is enabled), display the report on a page for printing, and export the report (if this function is enabled). You cannot edit a report using a direct link.

Purchasing services in the office

The free service is provided with limited account capabilities. As part of the free access, you get the opportunity to check for borrowings using the Internet search module and view only brief reports. If you want to get acquainted with the full functionality of the service or expand the functionality of your account (receive full reports, connect additional search modules, etc.), we recommend that you first familiarize yourself with the tariffs; to do this, go to the “Tariffs” page.

Go to the “Tariffs” page

Purchasing a subscription to a tariff

In the “Tariffs” tab you will see a tariff schedule to familiarize yourself with the functionality of the tariffs. In the “header” of the tariff schedule you will see our line of tariff plans. Each tariff plan is connected for a certain period with a certain maximum number of checks; tariff plans may also differ in functionality.

Tariff plans and tariff schedule on the “Tariffs” page

To purchase a subscription to a tariff, select the tariff plan line and validity period by clicking on the switch, and then click on the “Connect” button.

After clicking on the “Connect” button, a window will appear with a message about a successful purchase, and at the same time, as many points as the subscription to the tariff cost will be debited from your account.

After subscribing to a tariff, you will see the name of your current tariff in the upper right corner.

Information about the status of the user account to the left of the menu

After you top up your balance, return to the “Tariffs” page and select the tariff again.

You can get more detailed information about the purchased services in your account and current tariffs on the “Statistics” page.

Important! Only after connecting to a paid tariff, you will be able to connect additional services and search modules.

Connecting a package of additional services and search modules

If you want to access all possible functions of the system and get the maximum quality, then the easiest way is to purchase a combined collection that includes all available search modules and additional services by clicking one button.

Top up your account with an amount sufficient to connect and go to the “Tariffs” page in the “Packages of additional services and search modules” tariff schedule.

United collection

Select a tariff plan and click on the “Connect” button. The system automatically activates all available services and search modules.

Important! To connect to the full package of additional modules and services, you must have the "Basic", "Advanced" or "Highload" tariff activated.

You can also purchase additional services and search modules of your choice.

Connecting an additional text recognition service (OCR)

This service allows you to recognize and check for borrowing scanned documents, photographs from a digital camera and graphic images containing text data.

To activate this service, go to the bottom of the “Tariffs” page, you will see the tariff schedule for additional services. Select the tariff plan line and validity period by clicking on the switch, and then click on the “Connect” button.

Additional services on the “Tariffs” page

Connecting additional search modules

To view additional search modules, go to the bottom of the “Tariffs” page. There you will see a line of additional search modules with a brief description and connection conditions. Additional search modules are connected for a certain period and have a maximum number of checks per connection.

Connecting additional search modules is only possible in paid plans.

Additional search modules on the “Tariffs” page

After connecting the additional search module, you will see its name next to the “Menu” icon.

Top up your balance

To go to replenish your balance in the top panel of your account, hover the cursor over the number of points, then the “Top up” button will appear, click on it.

Proceed to replenish your balance

After proceeding to payment, a page for replenishing your account will open in front of you. Enter the amount to top up in the input field, and then click the “Next” button.

Important! After confirmation of payment, payment must be made within 24 hours, otherwise the payment application will be canceled. Also note that when you top up your account, you purchase points, and the cost of 1 point is indicated.

You can view all transactions with your points, as well as the status of completed payments, on the “Balance” page.

You can also go to replenish your personal account on the “Statistics” or “Balance” pages. To go to these pages, click on “Menu” in the upper right corner and select the page you need. After that, click the “Top up” button.

View your balance

On the “Balance” page you can see the history of transactions performed with your points in your account.

To go to the “Balance” page, click on the “Menu” icon, and then select the “Balance” menu item. After going to the page, you will see a page with a list of all purchase transactions, debiting points for subscribing to tariffs and connecting additional search modules.

List of transactions on the “Balance” page

To find out in detail the result of the operation, hover the cursor over the icon in the “Result” column; after hovering over it, a note with an explanation will be displayed. Information about the payment status will be especially useful if problems arise when making payment transactions.

If a lot of transactions have been made in your account, you may find it convenient to use the transaction filter. By default, the list of transactions is sorted by transaction date in descending order. You can change the sort order in the table header; the direction of the arrow will change, indicating the sorting method, and the column currently sorted by will be highlighted in bold.

View usage statistics

On the “Statistics” page you can view detailed information about the purchased services in your account.

Many students don't know how make a certificate for anti-plagiarism on one's own. We will tell you and show you, with examples, the entire procedure for creating this certificate. To get an anti-plagiarism certificate, you need to do everything as shown below.

2. To download the help report from the free version of antiplagiat.ru, you need to select “Print version” in the window that opens “File” - “Print” - Microsoft Print to PDF printing tool and your help report will be saved in PDF format.

Sample inspection report Antiplagiat.ru

The anti-plagiarism system, after checking your work, issues inspection report.

This report will contain all the information: originality in %, borrowing %, citation %, date of verification (for example: 04/04/2017), sources.

Let's decipher each value separately.

1. Originality is the percentage of original text in your work. The higher it is, the better. Each university may have different requirements. But more than 65% originality of the text is recommended.

2. Borrowing- this is the percentage of text in the work that you borrowed from any sources. In simple terms, what you took and copied into your work. The lower the borrowing percentage, the better.

3. Quoting– this is the direct use of text from some source, i.e. conveying the author's thoughts without distortion.

4. Date– this is the day, month and year when the system was checked. (For example, 04/04/2017).

5. Sources– these are the sources where the system found matches with your text. Here also, the fewer there are, the better.

Sample test report Antiplagiat.VUZ

In the paid version of Antiplagiarism.VUZ you can download a report with the full content of the sources. The figure shows an arrow on a button, by clicking on which you can save the report. It will be in the format