Sneakers have long become a cult piece of wardrobe, as they can be used to create a variety of stylish looks. Unfortunately, the fabric is very susceptible to various stains, so every owner of such shoes should know how to clean white sneakers from stains. Washing should be done in a timely manner and with good quality so that you do not have any difficulties in removing stubborn stains. Proper and regular care is the key to wearing your favorite pair of sneakers for a long time, so there should always be several effective cleaning methods in your arsenal.
Washing any footwear should begin by wiping down the sole.
Proper and regular care is the key to wearing your favorite pair of sneakers for a long time, so there should always be several effective cleaning methods in your arsenal.
In our case, it is important to know how to clean the white sole of the sneaker to give it a great look. Consider the most popular methods of dealing with gray mud deposits:
- Washing powder. To get started, prepare a soapy solution: for a liter of water, it is enough to take three tablespoons of bleaching powder. Place the sole in a bowl of soapy water and let sit for 30-60 minutes. After a while, brush the rubber surface thoroughly. Repeat the procedure until it becomes pure white. At the end of work, rinse the sneakers with running water and dry.
Washing powder for cleaning white sneakers
- Baking soda. It has long been famous for its cleansing properties, in addition, the abrasive powder has a whitening effect. Add a few teaspoons of water to a handful of baking soda to form a thick gruel. Apply the resulting mass to the sole and use a brush or foam sponge to intensively rub the surface. Let the shoes stand for 20-30 minutes, then process again, rinse with cold water and leave to dry completely. This method can be used after every wear so as not to bring the sneakers to a deplorable state and to keep them constantly clean.
Abrasive powder has a whitening effect
- Toothpaste. Oddly enough, it can also be used to clean the sole. Especially good results are given by pastes with a whitening effect. Tooth powder is also suitable for the procedure. You will need an old toothbrush - it is very convenient to apply the toothpaste with it. Treat the rubber surface of the shoe, and then rub the product into it very vigorously. Make every effort - this is the only way you can achieve the desired result. Rub until the sole is crisp white, so be prepared to spend some time.
Toothpaste can also be used to clean the sole.
- Eraser. This subject is in the pencil case for every schoolchild and student, so difficulties should not arise. It won't 100% deal with dirt, but it will help you quickly get rid of unsightly black streaks. Just rub them thoroughly with an eraser, and then lubricate the surface with white or transparent cream.
The eraser will help you quickly get rid of unsightly black stripes
- Stain remover or bleach. You will need to make a fairly concentrated solution to get the best results. Pour water into a bowl, add a few tablespoons of stain remover, lather the resulting emulsion and place the shoes in it. After an hour, brush the surface, rinse and dry. Liquid bleaches do not need to be dissolved in water. It is enough to soak a foam sponge in them and rub the rubber sole with it. Dirt deposits and yellowness will quickly disappear under the influence of a chemical. Test on an inconspicuous area before cleaning your white sneakers this way. This will check the reaction of the material and avoid damage to it.
Bleach for cleaning white sneakers
- Acetone or nail polish remover. Every fashionista has them in a cosmetic bag, so they will definitely be at hand at the right time. So, soak a cotton pad in the liquid and run it over the contaminated area. As soon as you finish the necessary manipulations, rinse the product with water and blot with a dry cloth. This product is not suitable for all shoes, so you should also try it on a small area.
Acetone for cleaning white sneakers
- Acid. A solution of water and vinegar will help to return the sneakers to their former whiteness. The components should be taken at the rate: 3 parts of water to 1 part of vinegar. Blot a foam sponge in the mixture and work it over the sole. You will immediately notice how it takes on a clean, well-groomed look. Citric acid has the same principle of action. Put some powder on the rubber surface and scrub thoroughly with a damp sponge or brush. Finally, do not forget to rinse your shoes under running water and dry them thoroughly.
Now you can definitely deal with any dirt on the sole, so it's time to learn how to clean the surface of your white sneakers at home.
Handwash
If your favorite shoes are covered with dust or dirt, you should not hesitate. Before you clean your white sneakers from dirt, unlace them and soak the laces in a hotel container with soapy water.
Before you clean your white sneakers from dirt, unlace them and soak the laces in a hotel container with soapy water.
In the event that they turn gray or lose their former elasticity, they can simply be replaced with new ones.
Important! Note that only cold water must be used for washing.
This is due to the fact that hot and even warm water can lead to yellowing of the fabric, which will permanently ruin the appearance of the shoe.
So, soak your sneakers in water, and then rub them with a gruel from the soaked powder. To penetrate even hard-to-reach places and remove all dirt, use an old toothbrush. Once you've covered the entire surface, let the detergent sit for 20-30 minutes and then rinse the shoes thoroughly in cold water.
Note: the product must dry naturally, therefore the use of various heating devices or a hair dryer is strictly prohibited.
Removing stains
Washing does not always help get rid of stubborn stains, so you have to deal with them separately.
The stain remover powder must be mixed with water in such a way that a thick gruel is formed.
How to clean white sneakers at home using available tools:
- Baby powder. This method copes well with the task at hand. So, the powder must be mixed with water in such a way that a thick gruel is formed. Apply the mass to the contaminated area, rubbing it thoroughly with a stiff brush. Dry the wet spot, and then shake off the excess powder. The powder will absorb the dirt and you just have to shake it out thoroughly. Note that the product is only suitable for working with a fabric surface, so you should not test it on a rubber sole.
To prepare your shoes for processing, soak them in cold water for a few minutes.
- Soda. This powder is well known to everyone and is in the kitchen of every housewife, but not everyone knows how to clean white sneakers with soda. To prepare your shoes for processing, soak them in cold water for a few minutes. Mix equal parts baking soda and detergent and beat very well. The resulting gruel must be rubbed into the fabric surface and left for 10-20 minutes. Once your sneakers are completely soaked, brush them and rinse them in cold water. Finally, remember to blot them with a dry towel and leave to dry.
Hydrogen peroxide is the best sneaker cleaner
- Toothpaste. Rinse the stiff brush under running water and pour a small amount of detergent onto it. Thoroughly treat the surface of the sneaker; a thick gray foam should form on it. Collect it with damp wipes or a towel, and then apply white toothpaste to the cloth, rub until foam forms. Repeat the procedure until the resulting foam becomes snow-white. After cleaning, rinse your shoes and leave them to dry in a ventilated room.
- Hydrogen peroxide. This liquid is also not difficult to find: it is in every first aid kit, so if you need to act quickly, you cannot think of a better remedy. There are two ways to clean white sneakers with peroxide. The first is to wet a cotton pad with it and directly treat the stain. The second involves adding a solution to the powder, which will significantly enhance its effect and improve the cleaning result.
Machine wash
You already know how to clean white sneakers with baking soda and peroxide, toothpaste and baby powder. These methods are indeed very effective, but require a significant investment of time from you, as they involve manual processing. It is much easier to leave work to the washing machine and wait for it to cope with the task at hand. But it is important to take into account many factors and subtleties so as not to spoil your favorite shoes.
So, when the preparatory work is completed, it remains only to pour powder or special liquid into the desired compartment and set the correct mode.
Attention! The optimum temperature for washing is 30-35 degrees.
Moreover, it is necessary to immediately remove the spin, because intensive rotation in the drum can damage the fabric and rubber sole. By the way, modern models of washing machines are equipped with an additional mode for safe washing of shoes. If you are the lucky owner of such a device, feel free to press the button and go to rest until the end of the process. In the end, you just have to get your sneakers wet with a dry towel and wait until they dry completely.
Summing up
Shoe care is not an easy task, but by carefully studying the information provided, you can quickly deal with any contamination. The main thing is not to hesitate, and if a stain occurs, immediately take measures to eliminate it, because otherwise you will have to spend much more time and effort on it.
