We offer you a typical example of the official instruction of the operator of the commodity 4th discharge, the sample of 2020. A person who has education, special training and work experience can be appointed to this position. Do not forget, each instruction manual of the operator of the 4th category is issued to the hands of receipt.

On presented typical information about the knowledge that the operator of the commercial 4th category should be posted. About duties, rights and responsibilities.

This material is included in the huge library of our site, which is updated daily.

1. General Provisions

1. The operator of the 4th category refers to the category of workers.

2. The operator of the 4th category is made by a person with _________ (education, special training) and work experience in this position ________ years.

3. The operator of the 4th category is taken to the position and is exempt from office __________ (by whom, position)

4. The operator of the 4th category should know:

a) Special (professional) knowledge by position:

- state standards or interdigital conditions on the quality of all products stored in the serving park;

- The procedure for conducting targeted mixing of petroleum products: conditions and rules for the carriage of goods by rail and water;

- terms of contracts with the railway for the operation of the access pathway;

- Rules and deadlines for draining and filling tanks, ships, loading and unloading of cars;

- standards for the quality of sent and accepted petroleum products and dry cargoers;

- Flooring.

- Qualification requirements for this position of lower category.

b) General knowledge of the employee of the organization:

- rules for labor protection, industrial sanitation and fire safety;

- Rules for the use of personal protective equipment;

- requirements for the quality of work performed (services), to the rational organization of labor in the workplace;

- the sorting and marking of the materials used, the rate of consumption of fuel and lubricants;

- rules for the movement and storage of goods;

- types of marriage and ways to prevent and eliminate;

5. In its activities, the operator of the 4th category is guided:

- legislation of the Russian Federation,

- Charter (position) of the organization,

- this official instruction,

- Rules of the internal labor regulation of the organization.

6. The operator of the 4th category is subordinate directly: ____________ (position)

2. Official duties operator of the commodity 4th category

Operator of the commodity 4th category:

a) Special (professional) duties:

1. Maintenance of equipment for distributional refubs: with an annual volume of oil products for more than 10 to 40 thousand and leadership of all works; With the annual sales of petroleum products over 40 to 100 thousand tons.

2. Maintenance of commodity and reservoir parks, railway and auto-tankers, berths, bulk points, main oil pipelines, transshipment refuses and bulk points of oil refineries with cargo turnover, pumping volume or oil and oil supplies to 5000 tons per day.

3. Maintain liquefied gas parks with tank capacity up to 500 tons.

4. Maintenance of ethyl election installations, oil workers, torch farms, high and low pressure gas oil pipelines, gas holders, plums of bulk flight and berths.

5. Preparation of alkali solutions and acid desired concentration.

6. Maintaining the process of cleaning industrial wastewater, separation of caught petroleum products.

7. Control over the selection of samples and pumping mode.

8. Maintaining all pumps performed in a shift in the serviced farm.

9. Ensuring the safety of oil, petroleum products, gas and reagents.

10. Observation of heating reservoirs, for the state of grocery and steam lines in the territory of serviced parks, overpass, oil and equipment.

11. Settlement of tanks on the front of the plum-pouring and wagons on the front of loading and unloading.

12. Returning and operational reporting on the operation of the commercial park, the design of documentation for all operations on pumping, receiving and handing products, on the reception of empty wagons.

13. Registration of acts on simple tanks.

14. Observation of the serviceability of the inventory and equipment.

15. Guide to the work of cylinder creamiers.

16. Official duties for this position of lower (s) discharge (s).

b) General official duties of an employee of the organization:

- Compliance with the rules of domestic labor regulations and other local regulations of the organization, internal rules and norms of labor protection, safety, industrial sanitation and fire protection.

- Implementation within the framework of the employment contract of orders of workers with which it is fixed in accordance with this Instruction.

- Performance of work on acceptance and delivery of shift, cleaning and washing, disinfection of the maintenance of equipment and communications, cleaning the workplace, devices, tools, as well as content in proper condition.

- maintaining established technical documentation.

3. The rights of the operator of the commodity 4th category

The production operator of the 4th category has the right to:

1. Submit to the proposal leadership:

- to improve the work related to the obligations provided for by this Instruction,

- On the promotion of subordinates of the distinguished workers,

- On attracting workers who violated production and labor disciplines to the material and disciplinary responsibility.

2. Request from the structural divisions and employees of the organization the information necessary for him to fulfill its official duties.

3. Get acquainted with documents that determine his rights and obligations for the position of office, the criteria for assessing the quality of performance of official duties.

4. Get acquainted with the draft management decisions regarding its activities.

5. Require the guidance of assistance, including the provision of organizational and technical conditions and design established documents necessary for the performance of official duties.

6. Other rights established by current labor legislation.

4. Responsibility of the operator of the commodity 4th category

The operator of the 4th category is responsible in the following cases:

1. For improper performance or non-fulfillment of its official duties stipulated by this official instruction, within the limits established by the labor legislation of the Russian Federation.

2. For offenses committed in the process of its activities, within the limits established by the current administrative, criminal and civil law of the Russian Federation.

3. For causing material damage to the organization - within the limits established by the current legislation of the Russian Federation.

The job instruction of the operator of the commodity 4th category is a sample of 2020. The official duties of the operator of the commodity 4th category, the right of operator of the commodity 4th discharge, the responsibility of the operator of the commodity 4th category.

Unified Tariff Qualification Directory of Works and Professions of Workers (ETKS), 2019
Part number 1 issue number 36 ETKS
The issue was approved by the Decree of the State Committee of the USSR for Labor and Social Affairs and the WCSPS of June 7, 1984 N 171 / 10-109
(as amended by the Decisions of the State Protection District of the USSR, the CCSPS secretariat from 03.02.1988 N 51/3-69, from 14.08.1990 N 325 / 15-27, the Ministry of Labor of the Russian Federation of 21.11.1994 No. 70, from 07/31/1995 No. 43)

Operator commodity

§ 33. Operator Product 2 category

Characteristic of work. Measurement of petroleum products in tanks, tanks, buttons. Sample selection. Pumping or descent from water and water tanks and dirt. Weighing tank trucks, tare petroleum products, gas cylinders. Preparation of seals. Sealing. Suspension passports. Vacation to consumers of oil filters and receiving exhaust oils from them. Check the technical condition and purity of the containers of consumers, its blockage. Heated petroleum products. Loading and unloading with tare petroleum products and other liquid products.

Must know: appointment of tanks, measurements, their complete capacity and by a unit of height; sampling rules; Elementary information about the properties of oil, petroleum products and gas; draining technology and pouring; methods for filling reservoirs, tanks, petrolds; Ways to heal petroleum products; device of measurement devices, measuring instruments and devices; appointment of various oil filters; Characteristics of spent oils; Rules for the storage of tare petroleum products; methods of cleaning tanks, tanks, overpass, tanks from oil residues, petroleum products and dirt; rules for the technical operation of the maintenance of equipment; The main causes of losses and deterioration of oil, petroleum products and reagents during storage and pumping and methods of preventing them are; The norms of natural losses, the order of paperwork on the reception and delivery of oil and petroleum products.

§ 34. Operator Product 3 category

Characteristic of work. Maintenance of equipment for distributional refubilities: with the annual sales of petroleum products up to 10 thousand tons and management of all the works; With an annual sales of petroleum products over 10 to 40 thousand tons. Reception and accommodation, pumping, vacation and storage of oil, petroleum products, liquefied gases, trapped products, reagents and other products. Switching valves to indicate a higher qualification operator. Preparation of containers, overpass, risers, berths and pipelines for receiving, vacation and storage of oil, petroleum products, reagents, liquefied gases and other products. Determination of the specific gravity of oil, petroleum products and other liquid products in tanks, tanks and other tanks. Determination of temperature, maintenance of mechanical impurities and water. Collecting oil and petroleum products from oil workers, pumping them into measurements. Pumping water and dirt from tanks. Determination of the specific gravity of oil, petroleum products and other liquid products in tanks. Determining the volume of liquid products in tanks in calibration tables. Participation in the measurement of tanks, tanks. Tank sealing. Preparation of reservoirs, pipelines, creation and liquid equipment and other equipment for repair. Slice of alkalis, acids and other reagents from tanks. Maintaining lining gas, gas supply adjustment, filling of cylinders and tanks on gas-filled stations and installations for bottling compressed gas. Crushing, sorting and capping catalysts. Servicing oil workers. Ignition and sparking torch. Cleaning gas condensate. Pumping solvents and fuel in the production of ozokerite. Weighing and laying ozokerite in varieties. Maintain documentation for accepted and submitted products.

Must know: control nodes and communications served; Types of pumps, their performance, normal and permissible pressure; Rules of pumping hot, viscous and paraffin oil products and gases; Technical conditions for ozokerite and solvents; rules of operation of pipelines; the physical and chemical properties of oil, petroleum products, reagents and gas; The main causes of losses of petroleum products and reagents during storage, pumping and methods to prevent these losses are; device and appointment of sampling cranes, safety and respiratory valves, measurements, clappers, seals, compensators; the procedure for preparing communications for consistent pumping of oil, petroleum products and reagents; Methods of ignition and ruins of torches; methods for the simplest analyzes; Methods for determining the weight of oil and petroleum products in tanks and oil refers and tanks; Rules and established deadlines for the plum-pouring of railway tanks, petroldes and completeness of their plum, loading and unloading of cars and petrolds according to the charter and contracts with railways and shipping costs; operating conditions of driveways and berths; Fundamentals of a locksmith.

§ 35. Operator Product 4 category

Characteristic of work. Maintenance of equipment for distribution oil equipment: with the annual sales of petroleum products over 10 to 40 thousand tons and management of all the works; with an annual sales of petroleum products over 40 to 100 thousand tons. Maintenance of commodity and reservoir parks, railway and auto-tankers, berths, bulk points, main oil pipelines, transshipment refuses and bulk clauses of oil refining plants with cargo turnover, pumping volume or oil and petroleum products 5000 tons per day. Service of liquefied gas parks with capacity of up to 500 tons. Maintenance of ethyl election installations, oil bugs, torch farms, high and low pressure gas oil pipelines, gas rods, cream-liquid flight and berths. Preparation of alkali solutions and acid desired concentration. Maintaining the process of cleaning industrial wastewater, separation of captured petroleum products. Control over sampling and pumping mode. Maintaining all pumps performed in a shift in the serviced farm. Ensuring the safety of oil, petroleum products, gas and reagents. Observation of heating reservoirs, for the state of grocery and steam lines in the territory of serviced parks, overpass, oil and equipment. The arrangement of tanks on the front of the plum-pouring and wagons on the front of loading and unloading. Accounting and operational reporting on the operation of the commercial park, the design of documentation for all operations on pumping, receiving and renting products, on the reception of empty wagons. Registration of acts on simple tanks. Observation of the serviceability of the serviced inventory and equipment. Guide to the work of cereal creamiers.

Must know: state standards or interdigital conditions on the quality of all products stored in the serving park; the procedure for conducting targeted mixing of petroleum products; Terms and rules for the carriage of goods by rail and water; Terms of contracts with a railway for the operation of the access pathway; Rules and deadlines for draining and filling tanks, ships, loading and unloading of cars; standards for the quality of sent and accepted petroleum products and dry cargoers; Flooring.

§ 36. Operator Product 5 category

Characteristic of work. Maintenance of equipment for distributional refubilities with an annual sales of petroleum products over 40 to 100 thousand tons and leadership of all work with the annual sales of petroleum products over 100 thousand tons. Maintenance of commodity and reservoir parks, railway and auto-tankers, berths, bulk points of trunk oil pipelines, transshipment Petroleum and bulk points of oil refineries with cargo turnover, pumping volume or oil and oil and petroleum products over 5,000 to 10,000 tons per day. Service of liquefied gas parks with a volume of over 500 tons. Parking service with high-quality petroleum products and a complex system of communications, compounding petroleum products for the preparation of commercial products, gasoline ethyllation, additive additives and inhibitors. Maintaining operations, shipment and registration of settlements with transport organizations, maintaining financial settlements with railway. Guide to the work of cereal-cores.

Must know: state standards on the quality of all products stored in the park; The procedure for preparing the tanks to fill it with a higher product in quality; Rules for the reception and delivery of petroleum products and liquefied gases; conditions for regulating freight traffic on the supply and discharge pipelines; Rules of financial settlements with railway.

§ 37. Operator Product 6 category

Characteristic of work. Maintenance of distributional refubilities with an annual sales of petroleum products over 100 thousand tons and management of all works. Maintenance of commodity and reservoir parks, railway and automotive hoists, berths, bulk points of trunk oil products of oil refineries, transshipment refueling with cargo turnover, pumping volume or oil and petroleum products over 10,000 tons per day and leadership by all the works. Maintenance of reservoir parks with remote control systems and telemechanics systems. Manual and monitoring the operation of the automatic system of oil products in tank trucks. Ensuring the quantitative and high-quality preservation of petroleum products. Conducting the necessary measures to reduce the loss of petroleum products. Conducting accelerated physico-chemical analyzes of oils. Improving the operational properties of oils by introducing additives and mixing. Observation of the health of structures, equipment and inventory. Preparation of encoded information for the computing center. Guide to the work of lower qualifications operators.

Must know: Charters and contracts with railway and shipping on the timing and order of drain-pouring tanks, bunkers and bunkers and oil ducts, loading and unloading of wagons and petrolds; physicochemical properties of petroleum products and their applications; signs of aging oils, methods for their stabilization and mixing; standards for the quality of accepted, sent and released petroleum products; device of remote control equipment and telemechanics, their adjustment and adjustment; Device of electron-textual machines.

§ 37a. Operator Commercial 7th category

(introduced by the Decree of the Ministry of Labor of the Russian Federation of 21.11.1994 N 70)

Characteristic of work. Management of works and maintenance of the technological process on receiving, storage and leave of petroleum products on oil products supplying (implementation) of petroleum products with a potential annual supply (implementation) of more than 130 thousand tons. Management of work and maintenance of the technological process for servicing and reservoir parks, railway and automotive flights, berths, bulk points, trunk oil pipelines, transshipment refueling with cargo turnover, pumping volume or oil and oil and petroleum products over 16,000 tons per day. Maintenance of reservoir parks with tanks with a capacity of over 20,000 m cubic meters., Underground containers for storing petroleum products. Reception of filled tanks from main oil and product pipelines and the delivery of tanks for injection. Maintaining communication with the controller of the tank farm, with a discharge shop of petroleum products, a laboratory, operators of commodity other reservoir parks, main oil and product pipelines, computing center.

Must know: technological process of receiving, storage, vacation and pumping oil and petroleum products; construction and methods of exploitation of oil and petroleum products storage tanks, including underground containers; rules for the interaction of bulk points, tank farms, main oil pipelines, railway and water transport; Standards, regulatory documents for quality, storage and pumping of oil and petroleum products.

From January 27, 2020, the rules for issuing documents for the right to control the rolling stock both on the paths of the general and on the ways of unwanted use are changed.

Main changes

1. The issuance of a certificate for the right to control the rolling stock in ways of common use is now not carried out by Russian Railways, but Rostransnadzor and becomes a state service.

2. To control the rolling stock, it is also necessary to obtain a certificate of management in Rostransnadzor.

Coordination of rail training programs

Requirements for professions that cause professional standards and technology development are constantly changing, in connection with this, the process of change, adjustment and update of curricula, in particular on railway professions. Last week we received training programs, fed and approved by the Ministry of Transport and the Federal Agency for Railway Transport by Professions:

Learn a railway crane to manage

Last week, the theoretical training of the railway crane driver was completed. Railway crane drivers were studied, taking into account all the specifics: Maneuver work, alarm and safety rules on the railway ... As part of the course, an emphasis was made on CDE-251 and KDE-25 cranes, as well as a console-1000/2 high load capacity up to 125 tons.

Next week, the trainees will go to our landfill, where they will practice apply the theoretical knowledge under the guidance of experienced instructors.

Introduction to the production of oil and gas

Where does oil come from? How is it mined and what is recycled? How build drillings, drill and finish well?

All this was discussed on the course "Introduction to the extraction of oil and gas", which was carried out by the specialists of the Oil and Gas division "Promresurs" last week.

Although the course ended, we will be happy to repeat it for you.

The course will be useful to you if:

We studied: the training of electroplating

People who have mastered the qualified specialty has become a little more, cheers!

Our specialists conducted another training of electroplating workers with the organization of theoretical and practical training. During the practical classes, work was carried out on the coverage of details of complex forms.

Now Galkes will be able to independently implement the stated work, and the company will not spend invaluable time on their training in the process of working on productive details and will reduce the level of marriage in its production.

All who have not been learning have not been waiting with us!

Railway crane group group set in July

Friends, at the end of July, training will begin by the profession of "Railway Crane".

Training will consist of 2 parts: theoretical and practical.

The theoretical part is held from July 31 to August 18, 2017. As part of the training, topics such as crane device, operation, loading and unloading operations, alarm on the railway and maneuvering bases will be considered.

Slaftallo on the ways of Russian Railways

The Promresursursursurs of Railway Unit specialists were adjusted by the training program for the "Signalist" profession in accordance with the requirements of JSC "Russian Railways". In particular, the requirements of labor protection instructions and signaling officials approved by regulatory acts of Russian Railways were taken into account. Also, the preparation is carried out by mastering the profession "Monter Path" - a mandatory requirement when operating alarm on common pathways.

The conference was almost the entire color of specialists in all branches of distance learning, starting with the technical and finishing of its meaningful part.

Useful information that we managed to learn at this event would be imperative in our distance courses.

This article will discuss one of the most responsible professions. Foreign operator - work is very important and complex. All features of this profession will be told further.

Who is a trade operator?

This specialist is responsible for the safety, quality and transportation of various raw materials in refinery. This work is very responsible, and therefore hard. This is due to the fact that the slightest mistake will result in very large problems. So, if due to the overwhelming of the commodity operator, an incorrect mixing of different substances will occur, a huge part of the resources will be lost. Problems may occur with the movement of substances, their supply, preservation, etc.

The commodity operator controls the activities of a large number of workers. And this also imposes a mark on the profession; If at least one worker makes a mistake, wine will fall on his boss. That is why the commodity operator must be calm, not subject to stress. The work under consideration is really specific, but the prestigious and high paying.

Responsibilities of the commodity operator

Who really has a large number of various functions - this is a person with the profession of "commodity operator".

The duties of this employee are always available, and there are really a lot of them. Next, only some functions of the representative of the profession under consideration will be given.

The commodity operator is obliged to control the transportation of products at the oil refining enterprise. In addition to moving, the goods periodically check on quality. This also deals with the specialist. It is very important that the produced and recyclable products fully comply with standards. It is equally important to monitor the quality of the storage of raw materials. All these functions are also inherent in the commercial operator. Its responsibilities include such small functions as control over inventory in production, determination of product characteristics, work with documents, etc.

Professional requirements

Like any other professional, the commodity operator must comply with a number of requirements.

And the requirements for it are presented very high. This is, of course, with the burden of responsibility, which falls on a specialist.

A qualitative worker in the field of oil refining should have, of course, punctuality. After all, the profession described is very responsible work. The commodity operator must count everything before the smallest detail. Moreover, a competent specialist should always be ready for the worst. And this "worst" needs to be prevented by any ways.

The representative of the described profession should have rather deep knowledge in the field of chemistry, physics and logistics. Any gap in knowledge - and an error will be allowed. From here it follows, by the way, the following requirement: Stress resistance. So that it happens, a professional should always remain a calm and sensible person. It should be understood that fear and experience will not help the case, but only aggravate him.

Characteristics of the 2nd and 3rd discharges

It has the profession "operator commodity" discharges, each of which is characterized by certain requirements.

Below will be features characteristic of each discharge.

Characteristic of the 2nd category

The employee is obliged to observe the following activities: heating the substances, check the purity and sterility of containers, prepare sealing, take samples, weigh the products, engage in loading and unloading work. Some other, minor activities can be inherent.

3rd discharge characteristic

Sealing containers, drains of reagents and harmful substances from tanks, maintenance of equipment (no more than 40 thousand tons per year), storage of products, determination of weights of tanks, temperature measurement. This also includes the preparation of tanks and other inventory to repair work, as well as preparation of unloading / unloading documents. Other activities are possible.

Characteristic of the 4th and 5th categories

Features of the 4th category

Work with the equipment with a realization from 40 to 100 thousand tons per year. Service of various kinds of working stations - the implementation of up to 5 thousand tons per day (there are pierters, overpass, bulk points, etc.).

Production of certain solutions, sampling control. Binding for the health of the inventory, heated substances. Keeping accounting for work in parks. All features presented are basic. There is a 4th category and many other functions.

Features of the 5th category

Maintenance of equipment by implementing over 100 thousand tons per year. Park service sell up to 10 thousand tons per day. The implementation of operations relating to the delivery, shipment and registration of settlements with transport companies. Financial control over the railway. Manual over bulk and creamy. There may be a specialist 5th discharge and some other, less important duties.

Characteristics of the 6th and 7th Section

Requirements for employees of the 6th category

Manual with all the works. Maintenance of equipment by implementing over 100 thousand tons per year. Service of parks, overpass, plants, berths, etc., the implementation of over 10 thousand tons per day. Leadership over employees, which are engaged in a system of automatic filling and draining. Control over the quality of oil products, for its safety. Working with the computing center is to prepare for it. Manual operation of all operators discharge below. Some other functions can be inherent.

Requirements for employees of the 7th category

The trade operator of the final discharge is obliged to carry out the management of activities related to the reception, storage and leave of oil products, the implementation of over 130 thousand tons per year. Management should be carried out for working sites: overpass, communals, unloading and loading points, plants, etc., these areas can be implemented over 16 thousand tons per day. It is necessary to serve and containers whose volume may exceed 20 thousand tons. Manages the operator of the 7th category of reception and delivery. It is also necessary to maintain a permanent connection with the oil base dispatcher, with a computing center and with other items. A specialty representative of the 7th category can be endowed with many other functions and responsibilities.

Advantages and disadvantages of the profession

Like any other profession, the work of the commodity operator has a number of advantages and disadvantages.

The profession under consideration has the following advantages:

• High of course, it all depends on the discharge. However, the income from commercial operators is really high: from 20 to 75 thousand rubles.
• Ability to climb the career ladder. If you put a clear goal and start work actively, you can quickly grow professionally. In the profession of the commercial operator, there are all chances for this.
• Training. It is not necessary to underestimate the demand for such a profession as the "commodity operator". Training is one of the advantages of this work. It is absolutely not necessary to finish the university to take a workplace at least on the second category. It will be enough to complete any technical college, according to the specialty existing. A complete list of specialties suitable for the profession under consideration can be easily found on the network. But it is worth calling an educational institution, specially preparing commodity operators: this is the Leninogorsk Polytechnic College.

Among the disadvantages of the profession, it is possible to allocate overly high responsibility for any action. Some enterprises are also harmful working conditions.

On the importance of the profession under consideration

The commodity operator is one of the most important professions in the state. After all, it is oil that provides the economy of the Russian Federation to the greatest extent. In fact, representatives of the profession under consideration are the economic support of the state, its foundation.

Those young people that so far only think about their future must take note of such a profession as the "commodity operator". Vacancies for this specialty are available today in sufficient quantities.

In conclusion, it is worth saying that the profession of the commercial operator can exactly be called prestigious. This is a hard and responsible work, but highly paid and interesting.

This labor protection instruction is designed specifically for the commodity operator.

1. GENERAL REQUIREMENTS OF LABOR PROTECTION

1.1. To work by the operator of commodity allowed persons over 18 years old, past:
- preliminary medical examination and non-contraindications for work;
- introductory instruction on labor protection;
- fire briefing;
- primary instruction on labor protection in the workplace;
- training for safe techniques and methods of work;
- verification of knowledge of labor protection requirements, fire safety, as well as practical skills of safe operation, prevention, localization and elimination of emergency situations and fires.
1.2. During the work, the trade operator must pass:
- Periodic medical examinations at least once a year;
- repeated instructions in the workplace (1 time per quarter) on the safety of labor, industrial sanitation and fire safety, as well as if necessary, unscheduled and targeted instructions;
- study of the emergency elimination plan, anti-emergency and fire training workouts to work out this plan;
- Another test of knowledge in the field of labor protection, industrial, environmental, fire safety at least once a year in the scope of instructions for the types of work included in his duties.
1.3. In order to prevent accidents, accidents at work, professional diseases, the commodity operator need to know the classification of hazardous areas and their designations, the semantic value of warning signs, light and sound alarm, operating on the territory of the reservoir park and railway overpass.
1.4. The following dangerous and harmful production factors may affect the operator of the commodity in the process of work.
- toxicity of petroleum products;
- increased or reduced air temperature of the working area;
- increased air mobility working area;
- work at height;
- insufficient illumination of the working area;
- physical and emotional loads;
- increased level of static electricity;
- moving machines and mechanisms;
- non-ionizing radiation (when working with personal electronic computing machines);
- criminal actions of third parties;
- moved packaging;
- the impact of moving, emerging, rotating objects and parts;
- electric shock;
- high temperatures and pressure in steam pipelines (when heating high-viscous oil products, steaming tanks);
- increased (reduced) temperature of the surface of the equipment;
- moving railway rolling stock;
- elevated noise in the workplace;
- increased dust and gas supply of the working area;
- sharp edges, burrs on the surfaces of tanks, means of fastening and fastening devices of tanks, shut-off-sealing devices.
1.5. Under the influence of these factors under certain conditions (violation by the employee of the technological regulation, non-compliance with safety requirements, personal carelessness) the carrier operator can receive:
- injuries;
- burns;
- poisoning of petroleum products;
- injury when falling from height;
- electric shock;
- Skin disease under the influence of petroleum products.
1.6. The commodity operator must know the techniques and ways to first assist victims during accidents and be able to apply them in practice.
1.7. The carrier operator is obliged to observe the regime of labor and recreation, the rules of the internal regulation, the rules of production sanitation and personal hygiene.
1.8. The commodity operator must be provided and used while working with special clothing, special shoes and other personal protective equipment, according to the standard standards of free issuance of special clothing, special shoes and other personal protective equipment for workers in the oil industry, engaged in work with harmful and (or) dangerous Working conditions, as well as on the works performed in special temperature conditions or contamination associated with pollution. Order of the Ministry of Health and Social Development of 09.12.2009 №9 70N:
- suit for protection against oil and petroleum products from mixed tissues or costume of fire-resistant tissues based on a mixture of meta and para amide fibers;
- Leather boots with hard feet;
- gloves with polymer coating;
- rubber gloves;
- mask or semi-mask with interchangeable filters;
- alarm vest;
- headdress;
- T-shirt;
- underwear;
- Cloak to protect against water;
- helmet;
- the grade under the helmet;
- Belt Safety;
In winter, additionally:
- suit for protection against oil and petroleum products from mixed tissues on the insulation laying or from fire-resistant tissues based on a mixture of meta and para amide fibers on the insulation laying;
- Leather boots insulated with a rigid feet;
- gloves with polymer coating, oil-resistant;
- Woolen gloves (liners);
- hat with ear flaps.
1.9. The carrier operator must:
- know the rules for applying individual protection assistants issued to him, as well as those that are available on the facilities served and are used as duty or emergency situations;
- to know the simplest ways to check the health of these funds;
- know the places and rules for their storage;
- fulfill the requirements for the use of personal protective equipment established by instructions for specific types of work.
1.10. Operator commodity is prohibited:
- erase overalls with flammable liquids (kerosene, gasoline, etc.);
- dry and store clothing contaminated by oil products and footwear in industrial and sanitary rooms;
- to serve rotating and moving parts of the equipment, carry out other work in long-oil clothing, in scarves, scarves with hanging ends;
- Work in clothes, poured combustible substances.
1.11. Fire safety requirements
The carrier operator must:
- know and comply with the requirements of the instructions on fire safety measures and managerial documents establishing fire regime on the tank farm;
- carry out all fire fighting activities provided for by instructions on types of work and technological regulations;
- know the appointment and location in the reservoir park and railway overpacks of fire equipment, primary means of fire extinguishing, stationary means of detection, extinguishing and alerts about the fire and be able to use them;
- to know all possible causes of emergency and fire-hazardous situations, their development scenarios and the procedure for their actions, established by the emergency elimination plan (Place).
1.12. In order to ensure the explosion of the explosion, it is prohibited:
- exploitation of reservoirs that gave a precipitate that are not tightness, with faulty locking reinforcement, as well as with sunken or faulty pontions;
- entry into the territory of the reservoir park of cars, tractors and other transport, not equipped with sparkers;
- smoking and application of open sources of fire (matches, torches, candles, etc.).
1.13. Smoking is allowed only in specially equipped places of oil refubs marked with an appropriate index sign or a sign "Location of smoking".
1.14. Hamming frozen pipelines and reinforcement is allowed only by steam or hot water.
1.15. When working in the dark for local lighting, only battery lights in the explosion-proof version should be used, the inclusion and shutdown of which is made outside of explosive zones (for the rolling of the reservoir park).
1.16. Before applying the battery lamp, you should make sure that it is the sign of explosion protection, seals and all the necessary parts provided for in it.
1.17. In the event of a flashlight breakdown during operation, it is prohibited to search and troubleshoot within an explosive zone.
1.18. To warm up viscous and frozen petroleum products in tanks is allowed at a level of fluid over a heater of at least 0.5 m.
1.19. It is forbidden to leave on the territory of the reservoir park and the railway overpass of the unobed spills of petroleum products. They must immediately get out, and spill spill to heal and falling down by sand.
1.20. The used wiping material and impregnated with petroleum products sand, the soil must be folded into special metal boxes with tightly closing covers.
1.21. Do not:
- produce during a thunderstorm drainage of tanks and other devices, the rapid operations, level measurement and sampling manually, and also leave open tanks, railway tanks and other tanks with petroleum products open.
- clutter the entrances and approaches to fire extinguishing, communications and alarm;
- damage and reduce the height of the jolts;
- use fire inventory not for its intended purpose;
- Work in shoes with steel nails or horses.
1.22. The procedure for notification of accidents
In case of an accident at the production of his eyewitnesses (if possible, the victim himself) should immediately inform his immediate supervisor or the management of the refuse and, if necessary, call the ambulance brigade by phone 103.
1.23. If possible, it is necessary to keep the scene without a change before the investigation, if it does not threaten the life and health of employees and will not lead to an accident.
1.24. Before the arrival of medical workers, it is necessary to provide the first assistance to the victim, eliminating the pre-factors of injury (in the poisoning of the gas - to carry out the victims of the fresh air, when sunbathing on an employee of clothes - to put out, using a cat, with electric shock - free from its action, etc. ). At the same time, it is necessary to ensure its safety: when the scene of the accident - to wear a gas mask, with electric damage - to protect yourself from its impact: not to touch the body of the victim, which is under voltage, unprotected hands (use dielectric gloves or items that do not conduct current, thaw out ).
1.25. Rules of personal hygiene
1.26. Overalls must be kept clean and health. Leave overalls and exercises in the production room are prohibited. Store overalls and special workers follows in a special metal locker separately from personal clothing.
1.27. Store and eat food in the production premises is prohibited. Eating is allowed in a premises specially allocated for this purpose.
1.28. Before taking food, you must thoroughly wash your hands with water with soap. Apply for washing hands flammable liquids is prohibited.
1.29. For violation of the requirements of this Instruction, the Transportation operator carries a disciplinary, material and criminal liability in accordance with the current legislation of the Russian Federation.

2. Requirements for labor protection before work

2.1. Before the start of the work, the carrotary operator should:
- View, check in service and wear workwear, footwear,
- check the health of the instrument, inventory, fixtures, as well as personal protective equipment used during operation;
- when entering the railway tracks it is necessary to wear alarm vest, which must be on top of clothing and completely fastened;
- To familiarize yourself with the results of the work of the previous shift operator and receive information from him about the deviations in the process or fails in the service area.
2.2. Taking a shift, the operator must check:
- technical condition, the presence of grounding of serviced reservoirs, equipment (bulk risers, pumping equipment, vapor removal systems), pipelines, reinforcement;
- work of automation and alarm means; lighting state;
- the presence of fire inventory, the work of the communications, staffing of the medical aid kit;
- the presence of instructions, schemes, posters and safety signs;
- The condition of fences, stairs and their mount.
2.3. In winter, it is additionally necessary to check the performance (permeability) of pipelines, fittings, drainage devices of tanks.
2.4. When the frozen pieces of pipeline are found, the replacement replacement replacement replaces them.
2.5. The disadvantages needed to be reported to the direct supervisor (senior to change) and receive permission to receive changes or other instructions.

3. Requirements for labor protection during work

3.1. The carrier operator should only fulfill the work that enters his direct duties, according to the employment contract, or is entrusted to him by the head of work.
3.2. The carrier operator should not start fulfilling ordered one-time works that are not related to direct responsibilities by profession without obtaining the target briefing decorated in the prescribed manner.
3.3. Performance at height (for example: maintenance of equipment on the roof of the reservoir), as well as work using hose gas masks (in wells, containers, devices and other tanned places) should be carried out using a safety belt.
3.4. It is forbidden to be located on the territory of the oil and in the workplace in a state of alcoholic, narcotic, toxic intoxication.
3.5. When moving across the territory and premises, the refuses should be used by established passages and transitions. Move around the territory of the tank in sidewalks, pedestrian walkways, and where they are not - on the left side of the roadway of the roads (towards moving transport). Switch through the rolling of tanks, trays, pipelines only in installed places equipped with transitional bridges.
3.6. Do not touch moving mechanisms and their parts, do not touch the current parts, electrical wires (even isolated), cables, tires, terminals, lighting cartridges.
3.7. Places of possible isolation of gases and vapors of petroleum products (open yield of the tank during draining fuel, a trench where communications is carried out, etc.) bypass from the windward side.
3.8. Do not:
- be under the raised cargo and on the way to move it;
- stand and walk under forest flooring or in places where it is possible to drop any objects;
- to step on the lids of the hatches;
- walk along pipelines, traders;
3.9. All works included in the direct duties of the commodity operator must be performed in accordance with the requirements:
- technological regulations and technological schemes;
- Instructions for the technical operation of reservoirs, pumps, creamy flight and equipment, shut-off valves, devices, safety devices;
- instructions for labor protection by profession and types of work performed;
- emergency response plan (plas);
- other local regulatory documents in accordance with the approved list of mandatory instructions.
3.10. With participation in the performance of work of increased danger: work in containers, wells, fire, gas-hazardous work - the vehicle operator must be guided by the instructions for labor protection at these works.
3.11. When working on a computer (PEVM), comply with the requirements of labor protection instructions for PC users.
3.12. Contents of the Tank Park
3.13. The territory of the tank farm should be cleaned from garbage, foreign objects in a timely manner. The grass in the summer should be accessed and exported in the raw.
3.14. In areas where the accumulation of explosive gases and vapors of petroleum products is possible, warning signs must be installed.
3.15. It is not allowed inside the jams of the reservoir park, buttons, ditches. If it is caused by a technical necessity, it is necessary to establish the fencing of these places with warning signs, and at the end of the work - all deepening fall asleep, plan the site.
3.16. For the transportation of heavy equipment, materials to reservoirs during repair work is allowed to arrange moving through the fusion with a soil intake.
3.17. It is not allowed to stay on the territory of the reservoir park of persons who are not related to its service.
3.18. Service reservoirs
3.19. During the change, the vehicle operator must ensure the tightness of the entire tank farm, installations and pipeline communications on the serviced area. To this end:
- check the presence of gaskets in all flange compounds and the density of their fixation by bolts;
- monitor the state of installed equipment (check the performance of the respiratory valves, the presence of fluid in safety valves);
- timely take measures to eliminate the causes of detectable leaks.
3.20. The commodity operator should know that the tightness in the transport and storage system of petroleum products is one of the most important conditions not only to reduce the losses of petroleum products, but also, at the same time, creating a favorable sanitary condition of the service area.
3.21. The performance of the respiratory and safety valves is checked according to the approved schedule and in accordance with the technological regulations.
3.22. Inspection of tanks and tank equipment should be carried out in the manner prescribed by the instructions for technical operation.
3.23. When operating tanks with pontions, pontoons should also be inspected. In the upper position, the pontoon is inspected through the light hatch, in the lower position - through the hatch LAZ in the second belt of the tank. Movement on the pontoon of polyurethane foam for its inspection or repair is allowed only by trap. It is forbidden to navigate the pontoon when it is in a floating condition.
3.24. During operation, the pontoon metering or damage to its structural elements should not occur, as well as technological elements and devices located on the bottom and wall of the reservoir when filling and emptying the tank.
3.25. Pontoon should be in contact with the product to eliminate the presence of a steady mixture under it.
3.26. Pontoon tanks should be operated without internal pressure and vacuum. Ponteon design should provide its performance over the entire height of the reservoir without distortion. With the first filling of the reservoir with a pontoon of petroleum products, it is necessary to fill it up to a level that provides a pontoon from the support racks, and to withstand in this position 24 hours, to inspect the pontoon and make sure that it is tight. After that, enter the tank into operation.
3.27. It is forbidden to accept the petroleum product in the reservoir with a pontoon if air remained in technological or main pipelines after repair work.
3.28. When performing work on the roof of the reservoir, it is necessary to move only around the courts. Walking directly on the roof of the tank is prohibited.
3.29. The stairs and railings must be kept clean, clean from dirt, snow, ice in compliance with safety requirements when working at height.
3.30. It is not allowed to wipe the stairs and the railing of the washed rag.
3.31. All open drainage trays, ditches must be periodically cleaned from garbage and dirt.
3.32. Open and close the valves should be smoothly, without jerks.
3.33. The operator commodity must monitor the humiliation, traps and ventilation devices in them.
3.34. Do not:
- to passion a hammer or other similar tool a reservoir filled with petroleum products;
- dump a lot, roulette, tools and other items from the roof of the reservoir;
- to clog the place of work with woolly vershorized material (rags, rags).
3.35. If malfunctions in the equipment is detected in the equipment, the commodity operator must inform the direct supervisor and make an entry in a shift (watch) journal. It is not allowed to produce any work on troubleshooting.
3.36. Filling (emptying) reservoirs
3.37. Before filling (emptying) a tank, a commodity operator must check:
- operation of respiratory valves;
- the correctness of the opening and closing of the valves;
- Passing of pipelines.
3.38. The productivity of filling (emptying) of the reservoir should not exceed the total bandwidth of the respiratory valves installed on it (or ventilation pipes).
3.39. Filling the tank is carried out under a layer of petroleum products. No petroleum product is allowed to supply a falling (open) jet.
3.40. During the filling of the reservoir, the commodity operator should monitor the level of petroleum products (in order to avoid it overflow) and for other parameters (pressure, consumption, etc.), not allowing deviations of their values \u200b\u200bfrom the technological regulations provided for by the technological regulations.
3.41. Disconnect the current tank during petroleum products permitted only after the other tank is entered into the pumping.
3.42. Sampling and measuring the level of petroleum products
3.43. Sampling is made using stationary and portable samplers in accordance with the technological regulations and instructions for their technical operation.
3.44. Stationary sampler shut-off devices must provide duplication of each other and complete preventing the product pass, and also have a lockable and sealing casing on the hinge and the visor above the cap.
3.45. The construction of a stationary sampler should provide for the possibility of checking its performance without dismantling and freeing the reservoir from the product. Sampling and level measurement should be carried out in the presence of observing.
3.46. Before sampling, it is necessary:
- make sure the presence and integrity of the grounding copper cable; Connect a copper grounding cable to a grounding device (for a portable sampler);
- Check the health of the sampler.
3.47. When opening the cover of a fruitful hatch of the tank or railway tank (for the handle or bracket) to select the sample or measure the level of petroleum products, it is necessary to be with a windward side of the hatch. In order to avoid poisoning in the petroleum products, it is not allowed to penetrate or low to the neck of the open hatch (lower than 1 m from the neck).
3.48. Select samples of petroleum products during filling or emptying of tanks (tank) is prohibited. Select the sample should be taken no earlier than 2 hours after the end of filling the tank.
3.49. Measuring the level of petroleum products should be accurately accurately, avoiding the lots of the lot, the metrakestock or sampler about the edge of the measurement hatch is not allowing the friction of the measuring tape or the cable of the sampler on the edge of the hatch. It is forbidden to wipe the roulette ribbon with a woolen or silk rag. For this purpose, it is allowed to use only cotton rags.
3.50. The hatch cover after sampling and measuring the level of petroleum products should be smoothly closed, without falling and hitting it about the neck of the hatch.
3.51. When the oil product is spilling on the roof of the tank or on the railway tank during the selection of samples or measure the level - the spill place must be cleaned and wipe dry. Leave on the roof of the reservoir (tanks) rags, pass, foreign objects, unobedy spills of petroleum products are not allowed.
3.52. Carrying samples of petroleum products should be carried in special tissue bags worn over the shoulder.
3.53. When sampling and measuring level, it is necessary to pay attention to the serviceability of the hatches and equipment of the tank (tanks). About the observed faults should be submitted to the eldest on shift and do not start work until they are eliminated.
3.54. Work on the railway drain-liquid elake
Maneuver work on the railway tracks of the overpass should be carried out under the supervision and personal control of the responsible worker of the oil dump.
3.55. Operations on the plum-rank of railway tanks (hereinafter - tank) must perform at least two employees. Manages the works of a senior to change, which is prohibited to be removed during draining-bulk operations. The distribution of tanks under the drain-liquid operations of petroleum products is performed according to the established requirements.
3.56. At the end of the installation of tanks under drain-pouring, they must be linked and secured by brake shoes (from intrinsically safe metal) on both sides. Apply steel shoes for this and any random items are prohibited.
3.57. Before the start of the suspension of petroleum products from the tank, the carrier operator must:
- to get acquainted with the records in shift (watch) journal;
- check the health of the communication, the creamy equipment;
- check the completeness of the primary means of fire extinguishing and their health;
- Ensure that grounding: the rack of the plating, the equipment of the overpass, rails, tanks, pipelines, sleeves (if available);
- check the technical condition of the tank, its reinforcement, safety devices;
- ground the cistern boiler on the earthing circuit of the railway overpass;
- measure the level of petroleum products;
- close the wood sewer slap and open the cracker of the emergency tank (if available) or make sure that the emergency plum trays are working (if available).
3.58. Before plooming operations, an outdoor inspection of lower drain devices should be carried out.
3.59. Distributional operations from tanks are prohibited in the following cases:
- expired the term of the factory and depot repair of the chassis;
- expired the timing of preventive or planned repairs of reinforcement, technical examination or hydraulic testing of the cistern boiler;
- missing or faulty safety, shut-off valves or instrumentation;
- There are no stamps installed, inscriptions and unclear stencils;
- the cylindrical part of the boiler or bottoms (cracks, dents, noticeable changes of the form, etc.) are damaged;
- stairs are faulty, platforms, handrails, hatch caps (no rubber gasket, slices for filling), drainage devices;
- There is no tank technical inspection mark.
3.60. All identified disadvantages (malfunctions) are issued as an act, and the tank returns to the departure station.
3.61. The carrier operator must control the drain-pouring process without allowing leaks. In the case of detection of product leakage, the operation should be discontinued, the product merge and take measures to identify and troubleshoot. For lighting, the use of portable luminaires with voltage is not more than 12 V in an explosion-proof version, which include and turn off beyond the explosive zone.
3.62. It is forbidden to pull up and unscrewing the threaded and flange compounds of tanks and communications under pressure, as well as to use a shock tool when screwing and unscrewing nuts.
3.63. Performing drain-liquid work, sampling and measuring the level of petroleum products during a thunderstorm.
3.64. The covers of the hatches, the lower drainage devices of tanks must be opened and closed without allowing shocks that can cause sparking and after the creamy operations and measure the level of petroleum products they must be sealed.
3.65. Railway tracks should be passed only at a right angle, not advancing the rail head, previously convinceding the absence of a moving distance in a dangerous distance.
3.66. The commodity operator must be familiar with the plan and methods of safely performing the upcoming maneuver work, which is the head of the train station trains. Train compiler is obliged to provide the right placement and consistency of the actions of all employees involved in maneuvers, as well as ensure the safety of tanks on the territory of the Railway Oil Estabada and the personal security of employees.
3.67. The commodity operator must be extremely attentive in places of movement of tanks and transport and comply with the requirements of safety signs, visible and sound signals.
3.68. The carrier operator must follow the proper sanitary condition of the railway track.
3.69. Operator commodity is prohibited:
- to move or run a railway track before moving tanks;
- to become or sit on the rails;
- to break under the tanks;
- when moving railway tracks to step on the heads of rails and the ends of the sleeper;
- to sit on the steps of tanks, stand and go with them during movement;
- lean to standing tanks;
- walk inside the rail track and at the ends of the sleeve;
- Leave tools, devices and materials on the railways.
- It is located on the territory of railway overpass in places marked "oversized place" as well as these places when moving tanks. In the production of maneuvers, the operator is prohibited to pass on the roof, the stairs of the tank and the other parts.
3.70. Fastening the tanks on the railway paths is made after their complete stop using brake shoes. When fixing wagons-tank brake shoes should be taken only by the handle.
3.71. It is forbidden to install brake shoes immediately before the rail joint and on the rail junction; Under moving tanks.
3.72. It is forbidden to operate the brake shoes with a bundled head, with a curved and swinging sole, with a bundled (broken, broken, curved) to the sole, with a weakened fastening of the head with a sole, with a curved (broken) knob or without it, with damaged or significantly worn out soles with damaged or significantly worn soles .
3.73. The conclusion of the railway tanks from the refuses should be carried out after the end of the rapid operations, the closure of the hatch of the tank, the design of the necessary documentation, careful inspection and coordination in the prescribed manner.
3.74. Work on the overpass for the filling tank truck
3.75. The carrier operator is obliged to know the technological scheme of the overpass, the location of the bulk devices, the variety of petroleum products passing through them, and be able to unmistakably connect tank trucks.
3.76. Before starting the wizard, the operator is a commodity must check the compliance of the tank truck to them with the requirements:
- silencers must be equipped with sparkers,
- availability of fire extinguishers, cats, sandboxes with dry sand and shovel,
- the presence of a grounding chain with a land touch section of 100-200mm,
3.77. Before starting the filling, the tank truck should be attached to the contour of the grounding of the bulk overpass. It is forbidden to flow tank truck without joining the grounding device of the overpass.
3.78. The carrier operator together with the driver should monitor the process of oil product in the tank truck.
3.79. Dummy must be made when the car is not working.
3.80. If the petroleum revolving is allowed, the engine start is prohibited. In this case, the tank truck must be removed to the safe distance using a cable or rod. Spilled product should be removed immediately, the place is spill to clean up and fall asleep with sand.
3.81. At the end of the filling, the bulk devices (bulk sleeves) from the mouth of the tank truck are removed after a complete drain of the petroleum products, not allowing the blows about the neck of the tank truck. When using the rapid hoses, they must be equipped with tips from materials that do not cause sparks with a possible impact of the tank neck.
3.82. With an automatic system, the operator of the commodity should be guided by the instruction manual for the operation of this system.
3.83. Repair of tank trucks on a bulk overpass is prohibited.
3.84. Work in winter
3.85. The carrier operator should know the places of possible freezing pipelines, reinforcement, devices and control their permeability.
3.86. When moisture freezing in the pipeline, it is necessary to establish the approximate boundaries of possible damage and turn off the pipeline from the general system.
3.87. In winter, the territory of the reservoir park, railway overpass, the entrances to them should be cleaned of snow and ice, and the paths in the passage of people sprinkled with sand.
3.88. Cleaning from snow, ice and icicles of metal hatches of wells, stairs and reservoir roofs are allowed to produce only wooden shovels.
3.89. Safety Requirements for Electric Drive
When operating electrical drives, it is necessary to consider that a certain part of the drive is under voltage. Maintenance of electrical wiring valves should be carried out according to electrical requirements.
3.90. Translation into manual control should only be carried out with a fully stopped electric motor. Switch to the manual control of the drive control with the rotating engine is prohibited.
3.91. To transfer to manual drive of the electric drive:
- slowly rotating left or right flywheel, turn the switching lever in the center of the flywheel about 85˚ until manual control turns on;
- omit the switch lever (under the action of the spring it will return to its original position).
3.92. Manual control will remain on until the electric motor is turned on. Then follows automatic switching to work from the electric motor.

4. Requirements for labor protection in emergency situations

4.1. The reservoir park may occur in the following emergencies:
- overflow of petroleum products when filling the tanks, rail and automotive tanks;
- vacuum crumpled of the tank body when pumping the petroleum product;
- the appearance of cracks in the seams or metal of the tank hull;
- fire, fire, explosion;
- corrosion wear of equipment (tanks, pipelines);
- depressurization of pipelines;
- malfunction in power grid and electrical equipment.
4.2. On the railway track, the following emergencies are possible: spontaneous movement of wagons in paths, gathering rolling stock, leakage of petroleum products, damage to cars that can lead to fire, explosion, poisoning.
4.3. The operator commercial, who has noticed the danger of an accident or a situation threatening people should immediately inform the eldest on shift and act according to the emergency elimination plan (Place).
4.4. When pressed, cracks in the seams and mainly metal walls or bottoms, the current reservoir must be immediately released from the petroleum product. Welding cracks and chasing on the tank without bringing it to an explosion-safe state.
4.5. In the case of overflow of petroleum products, it is necessary to immediately stop filling the tank, cause fire protection, inform the management of the refuse and, observing security measures, proceed to the elimination of the accident according to Place.
4.6. With a vacuum mortification of the tank body in the process of pumping from it, the petroleum product should be immediately stopped, inform the refuse and act according to Place.
4.7. In case of fire or explosion on the territory of the reservoir park (railway overpass), it is necessary:
- immediately stop all types of pumping;
- cause a fire charm by phone 101 and, if necessary, an ambulance aid by phone 103;
- inform the management of the refuse;
- take measures to evacuate people outside the danger zone;
- Getting drawn by fire with primary fire extinguishing agents.
4.8. If malfunctions are detected in the power grid, electrical equipment that can cause sparking, refusal of control systems of anti-emergency and fire protection, short circuit, etc., the carrotary operator must turn off the damaged area and inform the suffering from changing (supervisor). The operator of the commodity is prohibited from producing any, even minor repair work with electrical equipment (shift of lamps, fuses, cartridges).
4.9. With an accident to provide first assistance to the victim, call an ambulance at the phone 103 or send the victim to the medical institution, to inform the direct supervisor.

5. Requirements for labor protection at the end of work

5.1. At the end of the work, the vehicle operator should:
- inspect and put in order workplace, fixed areas of the territory;
- bypass the territory of the oil supply;
- check the availability and health of fire equipment and inventory;
- to warm up (in winter) pipelines if their frost will be detected during bypass;
- Make an entry in a removable journal about the observed faults, about emergency and fire situations, if any, performed by the work on their liquidation, as well as on the instructions and regulations of the management of the tank farm.
5.2. Leave the workplace before the arrival of the shift is not allowed.
5.3. It is forbidden to give a shift to a person who appeared to work in a painful state, a state of alcoholic, narcotic and other toxic intoxication.
5.4. After the change of change, the carrier statement should:
- to remove, check the service and lead to the means of protection, workwear and footwear; Remove overalls into a special locker;
- Wash your face and hands with water with soap or take a shower.
5.5. All selected problems, violations of the requirements of industrial safety and labor protection during operation, a commodity operator must inform its direct supervisor.